Recent content by 83scrambler

TTT, anyone else go for adding this to their HMMWVs?

Hi Guys, I have been looking into the rear steer offering from Bulletproofrearsteer.com for some time now and wanted to get a thread started on it to get a collection of thoughts. I assume many have bumped into the offering, and if not, give it a look.

Thanks guys, the rear manifold support is in place. Moving forward like this for now.

Back at it and now installing the front two Pacifica seats. Down to the passenger side seat, which due to where I want the seat to be mounted, require that the battery box be removed and the batteries to be relocated. Just purchased the battery tray for under the hood from a well known H1...

Just a quick follow up here: I was able to "fix" the generator ear that I broke during my regulator replacement activity. I built a jig to ensure alignment of the ears front to back with a piece of all thread, washer and nuts. Adjusted the nuts to clamp down on the good ear and again to grasp...

On the subject of a H1 battery tray being installed into a HMMWV, I have the following questions: 1. What are the battery cable lengths needed when moving the batteries from under the passenger side seat to under the hood, both positive and negative? 2. Any specific items learned through the...

Delco civy alternator swap... do tell

Alright! One problem solved... one problem induced. The regulator resolved the charging issue, thanks for all the support to get back and forth! On to the next issue, pictures are worth 1,000 words, and in this case expletives. That's right, I replaced the regulator and brushes, set the...

Alright, pulled the Generator to be able to remove the rectifier... screws were well seated and not coming out conventionally What you see here is my verification that this is indeed a blade style recitifier (need to verify before purchasing a replacement). And here you can see a close up...

90Jimmy, thanks for the vote of confidence! Requesting pricing now on the following: QTY 1 - 2920-01-180-8666 Voltage Regulator QTY 1 - 5977-00-008-3338 Brush Set, Electrical Contact

Papakb, Based on your assessment of my poor excuse for explaining my issue, you see it being the regulator? I assume yes, but just want to be sure.

Pictures of the generator as requested, if there is a better more telling shot please let me know and I'll see about getting it taken and added.

So, some pictures to show what I am seeing... Pic 1 is at start with a cycle back and forth as expected when the GP's are firing. This occurs for the first minute. After some time, the voltage starts to increase... this occurs from 1 minute until 1 minute 30 seconds and cycle between...

Coug, I believe my generator to be a 60A, I have a 1993 non-serpentine belt system that appears to be stock. Batteries are the highest CCA Exide's (ones that you may find in a standard diesel truck) that I could find, but not the gov't issued version. where you say red, my gauge is white, and...

All, I am looking at an issue with how my HMMWV is functioning upon startup. The sypmtoms go away after some time, but up to now have not been able to pinpoint a specific chain of events occuring to troubleshoot through... Hoping someone else has on the board. Issue: Cycle to run Wait to...