• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Recent content by 84cucv1ton

  1. 84cucv1ton

    m1008 in lowa to new jersey

    truck runs and drives. have a bit of time to get it done. dont get on here much. give a me a call or text 732 966 six 8 four one thanks
  2. 84cucv1ton

    Jeep from CT to NJ

    need a jeep moved from East Hartland, CT to Point Pleasant, NJ. its 200 miles. 7 feet wide and 17 feet long. thanks a lot can give me a call 732-966- six 8 four one. thanks a lot
  3. 84cucv1ton

    Can I see some pics of your hydraulic ram mounted on your Dana 60?

    diy4x.com has a diff cover with a ram mount
  4. 84cucv1ton

    Complete steering replacement on my K30

    years ago I met a guy that had this set up on this truck. Works flawlessly and great price https://westtexasoffroad.wixsite.com/wtor
  5. 84cucv1ton

    1986 CUCV M1009 Decade after being wrecked.

    cucvrus, was trying to send you PM. Your boxes full.
  6. 84cucv1ton

    D Bowie Hauling LLC

    This guy got a truck for my father. From IL to NJ. Good Price. Got it done quick. He's in PA. His number 570.336.0185 Email DBowie01@hotmail.com Good guy to deal with so i wanted to pass this along. have a good one
  7. 84cucv1ton

    working on a M1031 few questions on the gas driven generator

    thanks Tim. i will try to find it ina few. i will check the carb today.
  8. 84cucv1ton

    working on a M1031 few questions on the gas driven generator

    I have this start switch on run. I have 12 to both posts on the coil and to the plug. Spins great but will not fire obviously. Any ideas? I did replace the bad fuse to. any one have the manuals. thanks
  9. 84cucv1ton

    working on a M1031 few questions on the gas driven generator

    I have this start switch on run. I have 12 to both posts on the coil and to the plug. Spins great but will not fire obviously. Any ideas? I did replace the bad fuse to. thanks
  10. 84cucv1ton

    working on a M1031 few questions on the gas driven generator

    good evening here are two pictures of the data plate on the body. I do believe it is an older one man for the Dodge frame. i found this: wisc. 4cyl. gas spec.5854-1 model g-204 variation 98255sw13644 thanks
  11. 84cucv1ton

    working on a M1031 few questions on the gas driven generator

    good morning, I have been working on this truck full a while now. Trying to get her ready for daily use. Runs and drive great. Now I'm trying to figure out why I can't get the generator to run. Cranks over great. Brand-new battery, coil and fresh oil. I has no spark hence the new coil. Never...
  12. 84cucv1ton

    CUCV from Indianapolis, IN to Point pleasant, NJ

    Need to have a M1031 picked up in IN and dropped off in NJ.I don't need a dropped off right away. If they can be linked up with other things save myself a few bucks that would be great. Let me know
  13. 84cucv1ton

    CUCV - No start with smoke from the wiring

    if you dont have something help full to post why bother posting?? thanks you to those who are actually trying to help instead of being a prick. back to it now. pulled both batteries. load test said they are fine. relay did fail. put in a new one. failed in about 3 hours. aaa towed me back...
  14. 84cucv1ton

    CUCV - No start with smoke from the wiring

    good thought. both batteries have a good volts. cleaned up the post since i was there anyway
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks