Recent content by a68cudas

Found 15490 its a Duralast belt. Are they the same Duralast is 15490.I never heard of Dayco. Autozone i went to had Duarlast 15490 These should be interchanagable because of same part number? Thanks for the reply

Hello i need to get alternator belt for passenger side alternator on m1009. im going to get at autozone only store close. can anyone tell me what size belt and or part number for belt on passenger side alt. that will work on my m1009? any help would be greatly appreciacted. Thank You:?:

Do i need to mount the napa st85 glow plug relay a certain way so that the wiring to it is correct and not flip flopped on my m1009? Or doesnt it matter which way? Thanks

batteries are fully charged. problem was engine vibrated bolts loose. one of the big mounting bolts snapped off. also the lil bracket to block bolt vibrated out and screwed up some threads doing so but that bolt didnt snap off. the starter was only held in place by one very loose mounting bolt...

Hello I went to fuel up last night and after fueling up when i went to start my m1009 the starter made a whining noise and wouldnt start. I have a delco remy 28mt 24v starter. I have had the starter on my m1009 over a year now and have never had any issues with the starter. I bought the starter...

Hello I just bought a 600 watt Katz block heater for my m1009. Does anyone know which freeze plug i should knock out and install the Heater at? My other question is for anyone with tips on knocking the freeze plug out the easiest way with out damaging the hole? Any one else on here living up...

TM manualtm9-2320-289-34p page 20-1 saysto make your own line from steel tubing and only gives lengths of 78,69 for the fuel feed and 73,44 length for fuel return. Does anyone know what size diameter line in need to get for both of those? Thank You Dave

i have big red wire on big bolt top big and small orange wires on bottom big bolt small blue wire on small bolt bottom and red or pink wire on small bolt top

Herea another pic dont know if any better because of sun being out. anyways big red wire on top big bolt, big orange and small orange wire on big bottom bolt, light blue wire on small bolt on bottom and i have the red or pink wire on small bolt top? Is the relay mounted properly its not...

Hello I forgot to take pics of old one before removing it. Can anyone let me know if i mounted the new one incorrectly? or correctly? I have attached pic of how i installed . want to make sure its not backwards or upside down before starting. Thanks

I wanted to purchase a solargizer for my m1009. I was hoping to get some feedback and which brands are good and which are junk? Ive looked on ebay and prices fluctuate and also there are a smaller 24v solargizer and there are a bigger one that is size of 4 of the normal sized solargizers. Anyone...

Hello i hook up gear reduction starter its been months since the old one came off anyways every thing is bolted down . i go to bolt down gear reduction starter bracket and notice there is a gap behind bracket and engine block. I go to the TM and see there is a small heat shield that is suppose...

Thank you DH the video helped. I just couldnt understand how when key was off it doesnt kill starter. Now i have a better understanding of how it all works. Thank You very much. And thank all of you who has helped. Now to order a wire guage and wait for the new starter to arrive.

I read the -20 TM about checking clearance and i have been looking for a wire guage so i can check and install the new starter properly. I am having one **** of a time locating a wire guage to check the clearance, every time i search all i come up with are wire guages for measureing the diameter...

How come the starter stays engaged or stays cranking even when the key is turned off? "If the gear stays engaged(because it is binding) the solenoid cannot disengage(causing starter run-on)." why doesnt the key in off position kill the juice going to the under dash relay and also the...