• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Recent content by Aaron101

  1. A

    CUCV M1009 Blazer will not start

    I am so happy I got my beast purring. First I started taking apart the dash, I suspected it was either the GP relay or the starter relay. since the warming light was coming on and no one chiming in that it was the GP relay I started to look for the starter relay. After reading some posts on...
  2. A

    CUCV M1009 Blazer will not start

    No never touched that with a tool. I took off the cover to make sure no connections looked corroded, and shock the wires with my had to make sure everything was tight. since I just drove this thing I am hoping to mess with as little as possible.
  3. A

    CUCV M1009 Blazer will not start

    One more thing. I hooked up a remote jump button to the starter solenoid while hooked up to the batteries, and when the key was on. The starter was out of the bell housing and resting on the front drive shaft at the time, but it did work. This was a tense situation for me. I turned the key ran...
  4. A

    CUCV M1009 Blazer will not start

    I also had my jeep hooked up with cables to one of the batteries to make sure it had extra power. And on a separate occasion I had my battery charger on start mode to the other battery when I started it (jeep was not hooked up). That battery showed 100% on the charger after the attempt. Just...
  5. A

    CUCV M1009 Blazer will not start

    it came with a 24V replacement still in plastic. easy swap. it said it was produced in 1997. I watched as they hooked it up to their machine. the gear popped out and spun. and the machine said GOOD.
  6. A

    CUCV M1009 Blazer will not start

    24 volt
  7. A

    CUCV M1009 Blazer will not start

    I just got it about 2 weeks ago. It sat for 10 days after I drove it home, and now will not start. It just clicks! I changed the solenoid and took the starter into the auto parts store to test. Starter is good! I charged up both batteries to 100% and no change in the issue. This is my first...
  8. A

    CUCV M1009 Blazer won't start

    thanks for the link, I need to spend more time on this site and find the TM's and such. thanks again.
  9. A

    CUCV M1009 Blazer won't start

    thanks, that's what I thought. It seems like the clicking I here is coming from up top, but its hard to tell.
  10. A

    CUCV M1009 Blazer won't start

    Thanks, I will try. The 12v solenoid on the firewall that looks like a ford solenoid, does that go to glow plugs or starter?
  11. A

    CUCV M1009 Blazer won't start

    I just bought a CUCV M1009 Blazer and it had a problem with the lights, only the head lights work (No tail lights, no turn signals, no brake lights, and marker lights). I replaced the turn signal switch, wiper switch, light switch, and checked all baulbs and fuses. Still no lights. Also I...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks