Artisan's latest activity

  • Artisan
    Artisan replied to the thread 18,000 WINCH MOUNT.
    That's not a bad idea.... Maybe have one piece waterjet cut from .375 or .5 steel like this and just get longer Grade 8 bolts and add...
    • Washer-cad.jpg
  • Artisan
    Artisan reacted to Hammer's post in the thread 18,000 WINCH MOUNT with Like Like.
    How thick is that channel? Honestly, what you have is probably just fine. I just like to build stuff way overkill and never think about...
  • Artisan
    Artisan replied to the thread 18,000 WINCH MOUNT.
    The 10" channel is about .262 thick. There are 8- M12 bolts thru the bottom. I ordered some proper oversized washers for the 8 M12's...
    • IMG_1696.JPG
  • Artisan
    Artisan replied to the thread 18,000 WINCH MOUNT.
    The plan right now is to add a piece of 2" x 2" radius corner'd tailer hitch tube along the rear edge for more support. To be stitch...
    • two-inch.jpg
    • IMG_1690.JPG
  • Artisan
    Artisan reacted to Jbulach's post in the thread 18,000 WINCH MOUNT with Like Like.
    If it’s not too late and your apprehensive about strength, you might consider a couple of web stiffeners underneath the channel...
  • Artisan
    Artisan reacted to Jbulach's post in the thread Artisan's M916 with Like Like.
    Looks good!
  • Artisan
    Artisan replied to the thread Artisan's M916.
    Any fabricators here? SEE THIS LINK; https://www.steelsoldiers.com/threads/18-000-winch-mount.196251/
  • Artisan
    So the TILT trailer I am fixin' up for my M916 is getting a winch. I bought two of those 18,000 lb WARN Seris 18 winches a few years...
    • IMG_1686.JPG
    • IMG_1687.JPG
    • IMG_1688.JPG
    • IMG_1689.JPG
    • IMG_1690.JPG
  • Artisan
    Artisan replied to the thread Artisan's M916.
    Steering Wheel Repair So I called a couple of steering wheel repair shops and the prices were astronomical to putty up my ring cracks...
    • M916.jpg
    • IMG_1668.JPG
    • IMG_1669.JPG
    • IMG_1670.JPG
    • IMG_1678.JPG
  • Artisan
    Artisan reacted to simp5782's post in the thread Artisan's M916 with Like Like.
    Yeah. Walmart has pretty good deals on commercial tires lately
  • Artisan
    Artisan reacted to WillWagner's post in the thread Artisan's M916 with Like Like.
    Try something like this.... https://yourtireshopsupply.com/category/796_831/motorhomesbusesclass-steel-wheels Or this...
  • Artisan
    Artisan replied to the thread Artisan's M916.
    So, I decided to bite the bullet and get all new tires for my trailer. I shopped them HARD! I ended up w/ 9-235/75/R17.5 tries for...
    • IMG_1664.JPG
  • Artisan
    Artisan reacted to simp5782's post in the thread Artisan's M916 with Like Like.
    They make screw on extenders.
  • Artisan
    Artisan replied to the thread Artisan's M916.
    But because it is a dual set up the inners have to be the extended kind. I was hoping someone knew of good tough ones if they exist...
  • Artisan
    Artisan reacted to WillWagner's post in the thread Artisan's M916 with Wow Wow.
    You REALLY want bullet proof? Have them foam filled. You will never have tire issues until you need to change them, then they need to be...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks