Recent content by Artisan

  1. Artisan

    Artisan's M916

    Deleted
  2. Artisan

    TM Search Help

    Guy it is a ridgid shelter as you see here on the truck.
  3. Artisan

    TM Search Help

    THANK YOU for the reply and please excuse me for not getting back to you sooner, I did see your reply and just got lax... I saw that info... I still could not find anything other than REPLACE FIXTURE! Maybe some day I will run into someone who has a decrepit can w/ some parts. Thanx Again!
  4. Artisan

    Artisan's M916

    ... Just for ships and giggles Project Tilt Trailer is coming along nice. Almost done w/ stairs to command module. I drew stringers in AutoCAD and had sendcutsend.com cut them for me out of .375 ALUM and grabbed some McMaster steps and some framework and Viola! Adjustable legs in the works.
  5. Artisan

    TM Search Help

    Where is the proper spot to ask for TM Search help? I have an 8' x 10' Ridgid shelter I need all the TM's for it ; ( I looked hard) I am stumped... I own a ; S-715/T (*9)(MARINE CORPS) SHELTER 10-FOOT 5411-01-298-1661 REPRODUCTION/DISTRIBUTION FACILITY...
  6. Artisan

    Artisan's M916

  7. Artisan

    Artisan's M916

    BATTERYS and FUEL ISSUE So the truck has been sitting while I rebuild my trailer. I went to start the truck and it turned over and over and right before the old batteries went kaputt she started to fire and then it started. This killed the old batteries, and I assume the engine was not...
  8. Artisan

    Artisan's M916

    M916 TM's for Mullaney or anyone else who needs. Mullaney you prollay have a 400HP, not a 300 hp.
  9. Artisan

    18,000 WINCH MOUNT

    This is what I ended up with. I added a center 3" x 3" x .250 wall support underneath and I axed the origional vertical support and made my own. The reason for the vertical is you not supposed to pull from the top of a winch.
  10. Artisan

    Artisan's M916

    WARN Series 18 18,000 Military Winches I picked up 2 of these bad boys some time back. I think they were on MRAPS / Buffalo type trucks. I needed some springs for the Anti Birds nest tension plate and dang, they averaged $20 EACH plus ride! I took some measurements and pulled the trigger on a...
  11. Artisan

    What have you done to your MTVR today?

    Jon , Allow me to interject here for your safety and others bro. That is an 80,000 lb rated towbar if I remember right. It is a BEAST! I can not safely lower it nor raise it alone and I am a pretty big boy. It is really heavy. Your strap WILL FAIL! Plus it will bounce and you do not need...
  12. Artisan

    Artisan's M916

    ONE MAN'S TRASH... _So we went from a Big Cam 1 to a Big Cam 3 and w/ the BC3 there is no LuberFiner 750 used. I went w/ my initial idea of converting that tank into a WindShield Washer Fluid Resivoir and by golly, all my thoughts came together and it works! Remember I have installed an A/C...
  13. Artisan

    18,000 WINCH MOUNT

    That's not a bad idea.... Maybe have one piece waterjet cut from .375 or .5 steel like this and just get longer Grade 8 bolts and add undeneath...
  14. Artisan

    18,000 WINCH MOUNT

    The 10" channel is about .262 thick. There are 8- M12 bolts thru the bottom. I ordered some proper oversized washers for the 8 M12's. The rear strongback got upgraded to 2.5" x .25" square tube... All welds, top and bottom are to be uniwelded. Darn thing is heavy Ha~! Here is the bottom of...
  15. Artisan

    18,000 WINCH MOUNT

    The plan right now is to add a piece of 2" x 2" radius corner'd tailer hitch tube along the rear edge for more support. To be stitch welded top AND bottom. The front edge will be uniwelded to trailer's channel . Plus the .375" mounting plate / armorment.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks