• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

azreark1's latest activity

  • A
    azreark1 replied to the thread MEP-114A GPU.
    looks like i have 400hz
    • IMG_1603.JPEG
  • A
    azreark1 replied to the thread MEP-114A GPU.
    So when you say A2, A24, etc., are you referring to their label on a wiring schematic? Im still working on deciphering it. Worries me...
    • Genset Panel1.JPEG
    • Genset Panel2.JPEG
    • GCU1.JPEG
  • A
    azreark1 replied to the thread MEP-114A GPU.
    So the GPU box is a Hobart TR-1528, snagged a manual and was going through it. The panel is missing a switch so referenced the manual...
  • A
    azreark1 replied to the thread MEP-114A GPU.
    Yeah i don't think i have access to anything but an airplane that could actually stress test this unit.
  • A
    azreark1 replied to the thread MEP-114A GPU.
    So…what can i plug into this other than a coffee maker(from a previous post lol) that incan test without burning it up, any ideas? Haha...
  • A
    azreark1 replied to the thread MEP-114A GPU.
    Yeah i think youre right for it being an air leak source, and also correct on the location, that is from the fuel selector to the first...
  • A
    azreark1 replied to the thread MEP-114A GPU.
    So when i very first got it running, the charge voltage was one of the first things i checked and it showed like 34vdc, i had to...
    • IMG_1596.JPEG
    • IMG_1594.JPEG
    • IMG_1595.JPEG
  • A
    azreark1 replied to the thread MEP-114A GPU.
    So the one that isn’t running, if i take it apart and clean it then it should work again? That has literally never happened to me with...
  • A
    azreark1 replied to the thread MEP-114A GPU.
    Well the filter canisters were deff nasty, water inclusion and stuff, only the rear pump is working, easy options for jut removing them...
  • A
    azreark1 replied to the thread MEP-114A GPU.
    If i had to guess, the AC from the wires im pointing at(which are doubled onto the wires going to the main connection terminal) goes...
  • A
    azreark1 replied to the thread MEP-114A GPU.
    Yep only to start airplanes, that's it.
  • A
    azreark1 replied to the thread MEP-114A GPU.
    It is a 400hz unit, and yes we are at an airport. The usefulness of the 28vdc 1000amp starting power is the end use of the unit, there...
    • IMG_8818D779-5BB8-4403-A43E-F55269BFCD08.jpeg
    • IMG_0A8778B1-E7F4-4D5F-95DE-3241BB3CF3F3.jpeg
    • IMG_FB751D57-46FF-4B08-94F5-F898002BE3A7.jpeg
  • A
    azreark1 replied to the thread MEP-114A GPU.
    Thats a lot of good points. Some diesel injection pumps will pull past INOP pumps so wasn't sure if that applied to this model. So this...
  • A
    azreark1 replied to the thread MEP-114A GPU.
    They left the diagrams, all they did was paint the outside, interior is still OD Green. So with direct power the pump towards the...
  • A
    azreark1 posted the thread MEP-114A GPU in Generators.
    Hello group, my partner snagged a MEP0114A GPU for me to fix and get running (was retrofitted with a 28v DC starting unit for aircraft...
Show older items
113,744members
166,865threads
2,349,549posts
1,035online users
Top