• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Barrman's latest activity

  • Barrman
    Barrman replied to the thread Door sag.
    With the door open. Do you get slop at the hinges if you pick up on the handle end? If so, try to see if it is the upper or lower...
  • Barrman
    Barrman replied to the thread AN PTFE.
    That is confusing. I would just run -6 everywhere.
  • Barrman
    Barrman replied to the thread AN PTFE.
    I love AN fittings. Easy and infinitely reusable. Route the one from the primary filter under the radiator to the secondary filters...
  • Barrman
    Barrman replied to the thread AN PTFE.
    I typed the above and then saw your location. Do you have the metal pipe rusting out? That would be a good idea switching over to PTFE...
  • Barrman
    Barrman replied to the thread AN PTFE.
    The numbers for the Army/Navy fittings are in 16ths. So, a -6 would be 6/16 or 3/8. Where are you wanting to replace the steel tubing...
  • Barrman
    Barrman replied to the thread Operation: Gertrude. Kendelrios M715 restoration thread.
    Fuel pump or blocked needle and seat in the carb? My stock engine would just turn off while driving due to crud in the tank blocking...
  • Barrman
    Barrman replied to the thread Upper Radiator hose for M1008.
    I some how actually ordered 2 21284 hoses. They showed up today and both are 1.75” ID on both ends. I think you got a mislabeled part.
    • IMG_5302.jpeg
    • IMG_5303.jpeg
  • Barrman
    Barrman replied to the thread Upper Radiator hose for M1008.
    I’ve never seen the M1031 throttle control unit before. Thanks for posting a wide shot.
  • Barrman
    Barrman replied to the thread Upper Radiator hose for M1008.
    The -34P Technical manual for the CUCV is nothing but exploded views of the entire truck. Here is a link to access the manuals...
  • Barrman
    Barrman replied to the thread 2025 TX MV Rally.
    Glad you made it home and nice to meet you.
  • Barrman
    Barrman replied to the thread M1009 Electrical resistors..
    Start with downloading the -20 Technical Manual. It will tell you to start with load checking the batteries and making sure they are...
  • Barrman
    Barrman replied to the thread 2025 TX MV Rally.
    I just charged the A/C in the M1009 a few minutes ago Clint. I was prepping a ”luxury” convoy for you. See you tomorrow and sorry to...
  • Barrman
    Barrman replied to the thread 2025 TX MV Rally Buy/Sell/Trade Thread.
    I forgot about the robbery. Sorry to bring it up again. No worries on the stencil stuff. We will have plenty of time to visit about it...
  • Barrman
    Barrman replied to the thread 2025 TX MV Rally.
    I loaded my IBEK tow bar in the M1009 a little while ago. No fuel leakage today either. I was looking forward to seeing those of you...
  • Barrman
    Barrman replied to the thread 2025 TX MV Rally Buy/Sell/Trade Thread.
    Carnac, Didn’t you have stencils or a stencil machine to make stencils one year? I am going to be needing big and small letter and...
Show older items
113,219members
166,554threads
2,345,418posts
1,774online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks