• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Barrman's latest activity

  • Barrman
    Barrman replied to the thread 6.5l GEP engine rebuild kits.
    OK. You know what you are doing. That makes a big difference in the answer. The last GEP I had apart I used these guys for bearings...
  • Barrman
    Barrman replied to the thread M1028: Turbo 6.2 or 6.5 swap?.
    Thank you for watching my videos. Glad they helped. Adding a turbo to either engine will get you real close to what the F-250 could...
  • Barrman
    Barrman replied to the thread M1028: Turbo 6.2 or 6.5 swap?.
    I didn’t mean to give that impression. A turbo on a 6.2 is an amazing thing. However, even with a turbo you will not keep up with any...
  • Barrman
    Barrman replied to the thread 6.5l GEP engine rebuild kits.
    Are all of those things bad on your engine? If so, getting a used pull out might be cheaper and surer. Normally if bearings and pistons...
  • Barrman
    Barrman replied to the thread M1028: Turbo 6.2 or 6.5 swap?.
    What are your end goals for the truck? I ask because the 6.2 has the small throat combustion chambers. While the 6.5 has bigger...
  • Barrman
    Barrman replied to the thread IP timing.
    I just got done playing with this for a video that will publish this coming Friday. The link to my channel is in my signature.Everything...
  • Barrman
    Barrman replied to the thread 6.2 timing issue.
    Take it for a drive. 40-45 mph is the speed where the squarebody becomes a barn door in the wind. Try to get at least that fast and just...
  • Barrman
    Barrman replied to the thread 6.2 timing issue.
    How many hours do you figure the truck has idled and just moved slowly since the last time it went down the highway at speed for at...
  • Barrman
    Wow, you did some searching to find this old thread. Good job! My first thought when I saw your thread yesterday was I haven’t done...
  • Barrman
    Barrman replied to the thread 6.2 timing issue.
    It reads as if you have tried two different used Injection pumps. Is that correct? It also reads as if the fuel rate has been turned...
  • Barrman
    Barrman replied to the thread Fdc missing m35a2.
    American General Products was just a few years. I want to write sometime 1968 to sometime in 1970. Then it became AM General. My 1971...
  • Barrman
    Glad it performed well.
  • Barrman
    Barrman replied to the thread Fuel Filter Confusion.
    I can’t tell from the pictures which engine you have. Here is an article with pictures that shows the biggest difference...
  • Barrman
    Barrman replied to the thread Fuel Filter Confusion.
    Welcome to the fun. The data plate from the Injection pump you posted is for a 6.2 diesel engine. The 8 3 1 means 8 cylinder .31”...
  • Barrman
    Barrman replied to the thread Fdc missing m35a2.
    Congratulations. I thought production ended in 1988. Your truck probably isn’t a 1997. If it is a 1987 then it could have the dual...
Top