-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Barrman's latest activity
-
Barrman replied to the thread Replacement Gauge Cluster?.I’m not trying to push the Dakota Digital dash. But, it is what I have and know so that is what I will write about. Yes, the CUCV... -
Barrman replied to the thread Generator lights question.Sorry, “Check your grounds” is kind of implied in every military truck and especially CUCV conversation. Pay real good attention to the...
-
Barrman replied to the thread Wiring Harness Question.That generator to alternator kit works great. I have used it on several trucks. You also will find since your front harness is for a...
-
Barrman replied to the thread Generator lights question.It reads like your voltage regulators are going If your belts are tight and everything else is good. Buy a pair of alternator rebuild...
-
Barrman replied to the thread Replacement Gauge Cluster?.I have a very good review of the Dakota Digital gauge cluster in my 12 volt Cowdog Suburban. I have Autometer gauges in my 12/24 volt...
-
Barrman replied to the thread 1986 M1009 Rear Light Nightmare.You are now it seems down to what the Technical Manuals calls “Trace wiring.” I know you wrote that the wiring between the firewall...
-
Barrman replied to the thread Oil Pressure Gauge Location.Above the oil cooler lines is a little square headed set screw. It is blocking a pressurized oil gallery. That is probably the best...
-
Barrman replied to the thread 1986 M1009 Rear Light Nightmare.Unplug the ground from the front battery before you pull the pictured plugs apart. You will find it is actually 3 different plugs going...
-
Barrman replied to the thread 1986 M1009 Rear Light Nightmare.Here is a video I did about the ground tab on the fron blinker socket and replacement:
-
Barrman replied to the thread 1986 M1009 Rear Light Nightmare.Basically, there are only 4 wires going to the back of the truck for service lights. There are the black out lights and the fuel sender...
-
Barrman replied to the thread Injector Pump, reseal or replace?.I agree. It isn’t so much the miles as the years on the soft parts.
-
Barrman replied to the thread 2024 TX MV Rally.That chili was GOOD! Don’t make fun of him.
-
Barrman replied to the thread 2024 TX MV Rally.Here are a few more convoy videos:
-
Barrman replied to the thread 2024 TX MV Rally.I’m still going through videos to see if I want to post them of the convoy. But here is everyone leaving the ranch and the flame thrower:
-
Barrman replied to the thread 2024 TX MV Rally.I’m loaded up and ready to go. I wanted to do all of this not in the mud the forecasted rain is supposed to create tonight and tomorrow.
-
