Recent content by Berend

  1. B

    LMTV Abs troubleshooting

    Yes I think so, but could also be there was a green controller instead of the black one. Can’t remember anymore. If you put a green controller in a A1 truck you get all sorts of faults in the ctis and Abs.
  2. B

    MD LMTV Brand new CTIS controllers A0

    I have 10 brand new CTIS controllers. 8 are still sealed in the box two are without the box but also brand new. These are the green CTIS controllers so only for the A0 trucks. These don't work on the A1 trucks !!! I can reprogram them to any desired tire pressure setting or cancel the CTIS...
  3. B

    Add pto to lmtv 1078

    The winch can be used in gear, forward or reverse.
  4. B

    Pickup Cab assembly Doyle CA

    Is anyone close to Doyle CA to pickup a LMTV Cab assembly and store it for a couple of weeks. Thanks, Berend
  5. B

    Removing stucked brake drum

    Nice bottle jack trick always works , Drill a hole in the hub cover and hammer in a torch bit that you put on a ratchet Verzonden vanaf mijn iPhone met Tapatalk
  6. B

    Removing stucked brake drum

    Yes between the spring and edge of the brake drum. Maybe use some wood to. Verzonden vanaf mijn iPhone met Tapatalk
  7. B

    Removing stucked brake drum

    I use a bottle Jack to push it of. Verzonden vanaf mijn iPhone met Tapatalk
  8. B

    Argo 6x6 bathtub on wheels :)

    A running Argo 6x6 from Seagrove 27341 NC to Marriottsville 21104 MD No hurry 5 ft wide. 8 ft long. 40 inches tall. I’d guess about 1,000 lbs Verzonden vanaf mijn iPhone met Tapatalk
  9. B

    Confirming I have the right AC pulley.

    The 298-1308 is the correct pulley Verzonden vanaf mijn iPhone met Tapatalk
  10. B

    LMTV Conversion to 12V

    Not pretty sure 100% sure [emoji3] Verzonden vanaf mijn iPhone met Tapatalk
  11. B

    LMTV Conversion to 12V

    Use an 24v alternator and than make 12v with an inverter for the lights. That is done before . Verzonden vanaf mijn iPhone met Tapatalk
  12. B

    Broke down in Picayune Mississippi ... Need a lowboy to haul back to Louisiana

    Without the front drive shaft you can drive it in mode .But you are limited to 5th gear. But if you have time limp home with 35mph Verzonden vanaf mijn iPhone met Tapatalk
  13. B

    Broke down in Picayune Mississippi ... Need a lowboy to haul back to Louisiana

    Replace the u joint and drive it , if that is possible Verzonden vanaf mijn iPhone met Tapatalk
  14. B

    What have you done to your FMTV or LMTV today

    The A1 and A1R originally have some sound insulation “paint” on the back wall inside . It’s different from the A0 Cabs that are just bare metal. If you press it with your nail you feel it’s somewhat soft. Verzonden vanaf mijn iPhone met Tapatalk
  15. B

    Transmission seal leak

    Yes I have a forklift , essential if you ask me. Without it properly can be done somehow but that is going to take a lot of ingenuity. This was was my first time removing a transmission. Doing it alone with the cargo bed already removed took me a about 4 hours. But I have a forklift, u-joint...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks