• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Brandon314159's latest activity

  • Brandon314159
    Brandon314159 replied to the thread MEP 006A Low Voltage.
    I will upload a photo of the back of my TB1, it's known good operational. I pulled all the 12 lead wires off so I could pull the bell...
  • Brandon314159
    Brandon314159 reacted to Guyfang's post in the thread MEP 006A Low Voltage with Like Like.
    Should you have doubts about the A5 card, Member @kloppk makes and sells a brand new replacement. The A5 card is a known "problem" part...
  • Brandon314159
    Brandon314159 posted the thread Seeking MEP006A Rotor in Parts wanted.
    Hey all, Looking for a rotor for a 60hz MEP006A 60kw gen. Mine is electrically faulting to ground. Please send any leads my way...
  • Brandon314159
    Brandon314159 reacted to Guyfang's post in the thread MEP-006A Rectifier Fail Update with Like Like.
    Start a Parts Wanted thread. Cant hurt and some folks look faster at a Parts Wanted thread then a generator thread.
  • Brandon314159
    Brandon314159 reacted to jasher33's post in the thread MEP 006A Low Voltage with Like Like.
    Ok I will poke around more tonight after work, Im assumming my exiter assembly is bonked like I thought if this end up working. We are...
  • Brandon314159
    Brandon314159 replied to the thread MEP 006A Low Voltage.
    You'll want to look and see if the motors are delta or wye. It should be on the data plate.
  • Brandon314159
    Brandon314159 reacted to Guyfang's post in the thread MEP 006A Low Voltage with Like Like.
    I was just ready to post that the TB-1 is set right. BUT, by the dirt on the TB-1, you can see that the TB-1 has been set for higher...
  • Brandon314159
    Brandon314159 replied to the thread MEP 006A Low Voltage.
    Yay for progress. That voltage select 'card' is set for 120/208 WYE currently. If you move it up one, you'll get 240/416 WYE (not...
  • Brandon314159
    Brandon314159 replied to the thread MEP 006A Low Voltage.
    You mentioned that you measured 3ohms across 15 + 16 headed to the alternator? If so, you should be drawing some current when you apply...
  • Brandon314159
    Brandon314159 posted the thread MEP-006A Rectifier Fail Update in Generators.
    Well >10 years later, finally circling back to this generator as I have some renewed use for it. I left it with 6 new rectifiers...
    • 1751949524458.png
    • 1751949552418.png
    • 1751949623655.png
  • Brandon314159
    Brandon314159 replied to the thread MEP 006A Low Voltage.
    This should be the field current specs. if I'm reading the manual correctly.
    • 1751929802695.png
  • Brandon314159
    Brandon314159 replied to the thread MEP 006A Low Voltage.
    There's a lot of skilled folks here so I'm sure we'll figure it out. I'm fighting an issue on my MEP006 where my field current is...
  • Brandon314159
    Brandon314159 replied to the thread MEP 006A Low Voltage.
    Do you have your test rig wired up like this? 15 and 16 being the F2 and F1 terminals going into the main alternator. Have you...
    • 1751928555730.png
Show older items
113,467members
166,724threads
2,347,488posts
2,108online users
Top