-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
ckouba's latest activity
-
ckouba replied to the thread ECO Hubs Who needs 3:07 gears?.Still out on the trip but can drop a note... Check out the elevation profile of I-84 from Portland to SLC, then I-15 to Spanish Fork... -
ckouba replied to the thread Road Trip - UT/AZ Again.Things are going extremely well. Very briefly in Kanab this afternoon to stock up, then off to the great outback for more adventures.
-
-
ckouba replied to the thread Road Trip - UT/AZ Again.Moved camp into the Swell today. Perched on top of Cedar Mountain tonight. Lunch stop on edge of an outcropping Pulled into camp...
-
-
ckouba replied to the thread ECO Hubs Who needs 3:07 gears?.Mileage update: ~25k pounds, 6x6, 3.09's, Goodyear MVT's, big box on back (12' 4" high, 8' wide), kept speed at or below (most of the...
-
This is the originally planned trip which was supposed to be our big maiden voyage, and we're well underway at this point. Truck ran...
-
-
ckouba replied to the thread From fire truck to MTV.I see we both use the same accountant!
-
ckouba replied to the thread M1088 camper conversion.My windshield was in decent shape, but there were a few scratches on it which were annoying. Conveniently, they were on the wife's...
-
ckouba replied to the thread HEUI Troubleshooting - Injection Pressure Desired and Actual Mismatch.Initial install, should be pretty obvious why the universal lines weren't a good match here: For the record, the forward one rubbed...
-
ckouba replied to the thread HEUI Troubleshooting - Injection Pressure Desired and Actual Mismatch.Following up on this work: Motor is back together and running wonderfully. Desired and actual are running within ~10psi across all...
-
ckouba replied to the thread Preventing issues with balance beads maybe?.As the originator of the pic in post #1, I can confirm no adverse effects felt or observed in the first ~3k+ miles with those sintered...
-
ckouba replied to the thread M1088 camper conversion.Excellent news- up and running smoothly!! Got all the pieces back into the proper places, poured in some coolant and fresh synthetic...
-
ckouba replied to the thread M1078A1P2 CTIS Problem.Yes. It's the last thing in line on the way into the tire/first thing to run into when air is venting...
-
ckouba replied to the thread From fire truck to MTV.Got it. I ran my flow through it to make sure air purges, so mine heats up. I have heater and ~4 total feet of hose running outside of...
-
ckouba replied to the thread M1078A1P2 CTIS Problem.I put sintered filters in my wheels at the end of the plumbing delivering air and have noticed no adverse effects. The filter dia is...
-
ckouba replied to the thread From fire truck to MTV.Is the alu tank your header tank? You will likely want to move that indoors somewhere. Otherwise, your 150° glycol will be chilling...
