Recent content by dschoolxlt

That’s a good idea! Thanks, I’ll keep it in mind. I ended up pulling the cover off the fuel tank starting there to see if return fuel was making it back to the tank. It barely had any at all, so I pulled all the lines off and inspecting all the lines and tees again, thinking I had a...

Hello All, I have the 803. I’ve replaced the fuel return lines a few times with the standard issue cloth covered line. For some reason, I keep getting leaks on injector #3. The line either works it’s way off the injector, or separates at the tee. I tried a low tech solution of using a zip...

The main panel is actually in the house in one of the closets.. its a 50's cape cod. The main panel was replaced/updated in 2008 before i got the place. They luckily already have the neutral & ground bus bars separate and the panel is pretty clean. I would need to put the new transfer...

I had the unit delivered to the driveway.. We used the small aluminum harbor freight floor jack and spare paver bricks bricks to get some height under it & made space to get a pallet jack under them to roll off the truck and up the driveway, We put the bricks back under it and set the unit on...

Hey Folks, long time lurker, but new MEP owner. I picked up a new to me MEP-803. This ones been tier 1 reset and had the Tobyhanna remote monitor modification. Fortunately it had the loop back plug and fired right up. After reading the forums, I did the standard onceovers, replacing bad...