-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
ehuppert's latest activity
-
Eehuppert replied to the thread Brake/marker lights don't work.The running lights front and rear should be on same fuse. So if front is working the rear should also have power. Brakes are a seperate...
-
Eehuppert replied to the thread Can I use gasser downpipes?.I took the 6.2 out and replaced with a small block. Did that twice (CUCV and a 82 C30) Stock diesel exhaust stayed in both trucks...
-
Eehuppert replied to the thread Can't get hood or tail gate to open help.Way back when I used pex on the strike latches which helped. When I rebuilt/restored my truck I picked up some bronze bushings from the...
-
Eehuppert replied to the thread Brake/marker lights don't work.I had an issue on right rear lights. There's a ground wire under the light housing that the metal attachment point was gone! It's been a...
-
Eehuppert replied to the thread Can I use gasser downpipes?.I know the CUCV factory exhaust bolts up to SBC exhaust manifolds. Not certain on the BBC pipes. Typically I look up part numbers vs...
-
Eehuppert replied to the thread M1008 heater.Sorry, when I had burning mouse nest I removed blower motor assembly under the hood (not heater core cover) With blower motor out i was...
-
Eehuppert replied to the thread M1008 heater.If debris is coming out when blower on rodents have left a nest in there.... Would strongly suggest pulling the resistor out of the...
-
Eehuppert replied to the thread Suppressors.Off topic, but relevant! Swapping gauge clusters will require moving pins around in the gauge connecter (if changing to cluster...