-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
ger84's latest activity
-
ger84 replied to the thread m925a2 winch issue?.Thank you! -
ger84 replied to the thread m1070 no exhaust brake? and A/C?.Sounds like I will make sure the wires on the engine is what I will check first. Haha. I check today. Thanks for the info…
-
ger84 replied to the thread m925a2 winch issue?.ok I will look this weekend... i assume this would b a obvious to see once i open it up. Thanks
-
ger84 replied to the thread m925a2 winch issue?.interesting... I guess i need to open it up a little.... are you talking the control box in the truck or on the winch itself? thank
-
ger84 replied to the thread m925a2 winch issue?.thanks for the info! i plan to make a dump bed for this truck as well in the near future.... not really thinking electric was the way...
-
ger84 replied to the thread m925a2 winch issue?.I left out 125-150' of line so about half the spool was out. I mean i would have expected the winch would be awesome. I had a m35a2...
-
ger84 replied to the thread m925a2 winch issue?.The winch works with a low load. Like I can drag my ram 1500 backwards with winch connected however when connected to a tree the winch...
-
My m925a2 the winch seems weak... anything i should look at? It works and pulls in and goes out but then you would think that the...
-
ger84 replied to the thread m1070 no exhaust brake? and A/C?.is there any way to plug a computer up to this and check/manual override to engage the jake brake (test it)? I saw when I popped- the...
-
ger84 replied to the thread m1070 no exhaust brake? and A/C?.I did check the breaker and it seemed good when tested. I also purchased a new breaker just incase and no difference. I mean the...
-
ger84 replied to the thread m1070 no exhaust brake? and A/C?.Thanks for the information.... on the truck it says "contains Refrigerant" when it was sold... i havn't looked too much into it...
-
Hi all- So I have a m1070. My exhaust brake is not kicking on. Anyone know where I should start with figuring out what my issue is...