Recent content by graf_222

Yes one line goes to the compressor and the other goes to the air tanks...my unit is plumbed in the main air supply line

I picked up my evaporator two years ago off ebay for around $60. It is a Haldex# A-72420.

Yup, just a 10SI GM alternator. It is the 63 amp version from a 1986 K10 pickup. As for the belts, I used two Dayco 17570, but the length needed will depend on how close the alternator gets placed to the engine.

I've always heard to not go over 1/4 inch

Alternator mount I mounted my 12 volt alternator right above the stock 24 volt. I used longer belts and a replacement double pulley from a IH 966 tractor. The alternator seems to fit well in that place and so far neither pulley slips even though there is much less belt contact on the 24 volt...

M35A2 1. serial number 052510945 2. reg number 04F57870 3. NSN 2320000771616 4. bought November 08 in MN from private seller 5. Pass bumper number 147 ATS Driver bumper number G206 Thanks CARNAC