• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

grywitt's latest activity

  • G
    grywitt replied to the thread Mep 831A load issues.
    Thanks again. I didn't read your response before i tested the injector spray. Oops. I appreciate the explanations though. I'm running it...
  • G
    grywitt reacted to 2Pbfeet's post in the thread Mep 831A load issues with Like Like.
    To answer the injector test question, yes, that's sort of how to do it on the machine, but I would do something so you aren't spraying...
  • G
    grywitt replied to the thread Mep 831A load issues.
    Not much here just me trying giving it load and trying again. The return lines are full and routed correct. I've never watched the spray...
  • G
    grywitt replied to the thread Mep 831A load issues.
    https://youtube.com/shorts/6WQPS0s3pcI?si=HXVoo9XQCvKVAi7r Here is the injector spray pattern with the return lines hooked up...
  • G
    grywitt replied to the thread Mep 831A load issues.
    Sorry I know i jump around a lot. I try not to. One more thing. I never saw any fue
  • G
    grywitt replied to the thread Mep 831A load issues.
    I did make one troubleshooting mistake when making this new video. It might be that sitting with sea foam made the difference and not...
  • G
    grywitt replied to the thread Mep 831A load issues.
    https://youtube.com/shorts/tAAsPIdXzy8?si=jxNNoynAacGKmqvX Here I think is proof and hopefully a clue for someone more knowledgeable...
    • 20250809_193508.jpg
  • G
    grywitt replied to the thread Mep 831A load issues.
  • G
    grywitt replied to the thread Mep 831A load issues.
    I just realized I even took a picture of my thoughts on how to check the spray pattern. Is that how? Like ice got it?
  • G
    grywitt replied to the thread Mep 831A load issues.
    I do keep it in a conex that has good seals but I definitely will rodent proof it if and when it's susceptible to them. I already killed...
  • G
    grywitt replied to the thread Mep 831A load issues.
    Well i figured out the debris. Just a lot of sticks and twigs,leaves ect down by the exhaust and close enough to get burnt then fly out...
    • 20250809_124022.jpg
    • 20250809_124206.jpg
    • 20250809_125248.jpg
    • 20250809_125251.jpg
    • 20250809_125256.jpg
    • 20250809_125452.jpg
    • 20250809_125517.jpg
    • 20250809_125527.jpg
    • 20250809_125639.jpg
    • 20250809_125642.jpg
    • 20250809_121048.jpg
    • 20250809_121051.jpg
    • 20250809_121115.jpg
    • 20250809_123031.jpg
    • 20250809_123040.jpg
    • 20250809_123115.jpg
    • 20250809_123133.jpg
    • 20250809_123139.jpg
    • 20250809_123146.jpg
    • 20250809_123152.jpg
    • 20250809_123156.jpg
    • 20250809_123206.jpg
    • 20250809_123216.jpg
  • G
    grywitt replied to the thread Mep 831A load issues.
    Thank you for clarifying. I did pull out the push rods and they looked good. I didn't roll them on a flat surface. I'll keep digging in...
  • G
    grywitt replied to the thread Mep 831A load issues.
    I didn't get far nought into the engine yet to check the tappet under the push rods. Do i pretty much need to remove the engine from the...
  • G
    grywitt replied to the thread Mep 831A load issues.
    Thank you for the suggestions. I will work on the things you mentioned. So the injection pump only has one shim. Is that normal? Seems...
    • 20250808_175032.jpg
    • 20250808_175021.jpg
  • G
    grywitt reacted to 2Pbfeet's post in the thread Mep 831A load issues with Like Like.
    So, yes, that's more smoke than I would like at the loads you are adding. When you add loads, I can hear the engine respond, and it...
Show older items
114,030members
167,052threads
2,351,788posts
6,084online users
Top