-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Guyfang's latest activity
-
The frequency gauge should be before the output contactor so it should indicator frequency even if the main contactor is off. I would... -
Yeah i think youre right for it being an air leak source, and also correct on the location, that is from the fuel selector to the first...
-
Guyfang reacted to marchplumber's post in the thread My Dad loved my M1009 CUCV TNARNG #04 with
Like.
VERY NICE!! Thank you for sharing!! My sincere condolences for your loss..................... Nice TRK!! Kewler pics of your Pops! -
Guyfang replied to the thread MEP-114A GPU.This could be an air leak too. We saw it often it Patriot. Mechanics did not take the time to LOOK/FEEL when hooking up these lines...
-
-
Guyfang replied to the thread MEP-114A GPU.Do not forget the Day tank. And when its out, test the FL-1 and FL-2 on the float switch. Been there and done that with a full fuel...
-
That video with the return fuel line not connected and SeaFoam sounds like a much better behaved engine to me. How was the smoke? To me...
-
Guyfang replied to the thread Mep 831A load issues.To answer the injector test question, yes, that's sort of how to do it on the machine, but I would do something so you aren't spraying...
-
To answer the injector test question, yes, that's sort of how to do it on the machine, but I would do something so you aren't spraying...
-
I'd say the A1 AC Voltage Regulator is bad based on your readings.
-
Good Day: S12 looks good, (sometimes these do go bad so move them a couple times) but if the DCS still indicated the 3665 error, you...
-
Well, you can try the procedures starting on page 2-306 and ending on page 2-307 and hopefully that one turn will clear the flywheel...
-
Guyfang replied to the thread MEP-114A GPU.No Bus fuse, no battery charging. The set runs on 28 VDC, so if the battery charging alternator is non op, and the batteries are low...
-
There are off the shelf options available that will function however tearing the existing pumps apart and cleaning them cost you maybe a...
-
Been a while since we updated the Blood Sweat and Tears search. As it turns out, the reason nobody remembers "Blood Sweat and Tears" is...
-
Well it's good to keep in mind the overall list of things to do first things first we need to get the engine stable Sent from my...
