• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Guyfang's latest activity

  • Guyfang
    Guyfang replied to the thread MEP-114A GPU.
    Yeah i think youre right for it being an air leak source, and also correct on the location, that is from the fuel selector to the first...
  • Guyfang
    Guyfang reacted to azreark1's post in the thread MEP-114A GPU with Like Like.
    So the GPU box is a Hobart TR-1528, snagged a manual and was going through it. The panel is missing a switch so referenced the manual...
  • Guyfang
    Guyfang reacted to Scoobyshep's post in the thread MEP-114A GPU with Like Like.
    I built a heater for my 004 which consists of three water heater elements that I just submerge in a tank of water. Without factoring in...
  • Guyfang
    Guyfang reacted to Scoobyshep's post in the thread MEP-114A GPU with Like Like.
    Pretty much anything without a motor would be the general blanket statement. Heaters and incandescent light bulbs really don't care...
  • Guyfang
    Guyfang reacted to Scoobyshep's post in the thread MEP-114A GPU with Like Like.
    The frequency gauge should be before the output contactor so it should indicator frequency even if the main contactor is off. I would...
  • Guyfang
    Guyfang reacted to azreark1's post in the thread MEP-114A GPU with Like Like.
    Yeah i think youre right for it being an air leak source, and also correct on the location, that is from the fuel selector to the first...
  • Guyfang
    Guyfang reacted to marchplumber's post in the thread My Dad loved my M1009 CUCV TNARNG #04 with Like Like.
    VERY NICE!! Thank you for sharing!! My sincere condolences for your loss..................... Nice TRK!! Kewler pics of your Pops!
  • Guyfang
    Guyfang replied to the thread MEP-114A GPU.
    This could be an air leak too. We saw it often it Patriot. Mechanics did not take the time to LOOK/FEEL when hooking up these lines...
    • 1754846510709.png
  • Guyfang
    Guyfang replied to the thread MEP-114A GPU.
    Do not forget the Day tank. And when its out, test the FL-1 and FL-2 on the float switch. Been there and done that with a full fuel...
  • Guyfang
    Guyfang reacted to 2Pbfeet's post in the thread Mep 831A load issues with Like Like.
    That video with the return fuel line not connected and SeaFoam sounds like a much better behaved engine to me. How was the smoke? To me...
  • Guyfang
    Guyfang replied to the thread Mep 831A load issues.
    To answer the injector test question, yes, that's sort of how to do it on the machine, but I would do something so you aren't spraying...
  • Guyfang
    Guyfang reacted to 2Pbfeet's post in the thread Mep 831A load issues with Like Like.
    To answer the injector test question, yes, that's sort of how to do it on the machine, but I would do something so you aren't spraying...
  • Guyfang
    Guyfang reacted to kloppk's post in the thread MEP-803A Low Voltage with Like Like.
    I'd say the A1 AC Voltage Regulator is bad based on your readings.
  • Guyfang
    Guyfang reacted to LuckeyD's post in the thread MEP-1050 Fault Code 3665 with Like Like.
    Good Day: S12 looks good, (sometimes these do go bad so move them a couple times) but if the DCS still indicated the 3665 error, you...
  • Guyfang
    Guyfang reacted to LuckeyD's post in the thread Mag Pickup repairs on my MEP804 a with Like Like.
    Well, you can try the procedures starting on page 2-306 and ending on page 2-307 and hopefully that one turn will clear the flywheel...
Show older items
113,836members
166,918threads
2,350,193posts
1,425online users
Top