-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Guyfang's latest activity
-
On the pulley, usually it will pull right off, no puller required. The bolt is indeed left hand thread. The fuel shut off lever is 2... -
The worst hurricane I can recall recently here was Irma, it left me in the dark for 9 days and that was the year I got my first MEP...
-
You have a 300 amp service, I doubt you are routinely pulling 300 amps. This is kind of one of those things where you need to measure...
-
My 15 k is overkill. This is 10x overkill. I can only imagine what the fuel consumption is per hour on this beast Sent from my SM-S908U...
-
Wow, I had to look up that model. Not to be the party pooper, but 100 kW is a lot of generator to keep loaded to avoid wet stacking.
-
Okay I do believe you are winning the prize for the most amount of overkill on this one
-
Absolutely the right set of priorities. If you don't mind me asking what are you planning to use such a large set for? Sent from my...
-
Thats probably Matt's video on a 005. I've done a modified version of that procedure on an 005 and 004(my modes 004 is actually about 25...
-
Guyfang replied to the thread MEP-803a with Start/Stop Lever Issue.Thanks Ray. Glad to be back. 45 old ladies ans 6 poor old men on a bus. Had I not had hearing problems before, I sure would have by the...
-
first, the fuel shut off is screwed into the wrong hole. It goes in the top hole. Next, adjust your speeder adjustment so it runs...
-
Again, get it going as it is supposed to before trying the change.
-
You will have to do that manually. The first step is get it going so become familiar with what the books say and then we go from there.
-
Guyfang replied to the thread Mep-807a issue.Look here. Read the -10 starting instructions. Then look in the -24 for troubleshooting. Did you hold the S1 (Start Switch) up until...
-
Guyfang reacted to Sharecropper's post in the thread CUCV NP208 Speedo gear colors\tooth count with
Like.
If you have changed tire/wheel size, let me know the diameter in the center of the wheel assembly and I will be happy to calculate the... -
Guyfang reacted to weaponoffreedom's post in the thread CUCV NP208 Speedo gear colors\tooth count with Like.
Thanks fella. I will do as you advise. Will report back. I apologize to all if there is a thread on this already. I did a quick...