Recent content by hamrepairguy

powerzuk, have you gad a chance to check out your mep006 single phase conversion yet

Thank you for the offer I really do appreciate it. But since sewerzuk has already figured out the conversion and has put to the test, I will just wait for him to post the conversion. Im doing the conversion as a favor for my buddy and am not making anything for my time. I will probably get some...

Sewerzuk, is their a chance I could pay you for your time to check mep-006a wire configuration. I need the complete modification asap for my buddy. thanks

Maybe I should have added, that my friend wants to run the generator continuous for weeks at a time with no interruption. Most generators are not rated for continuos duty cycle like this one. He has a 1000 gallon subterranean fuel tank and gets his fuel dirt cheap. So cost to run really isnt a...

Thats up to my friend,but he does need every bit of power that it will produce on single phase.

Thank you both for taking the time to respond. I will hold off on doing the conversion until you publish the control wire reconfiguration. I am doing the conversion for a friend and do not want to risk damaging his genset. Thanks again

Can someone please tell me if this same single phase conversion will work on a mep 006a thank you

A kraus and naimer rotary switch would work well for the high current switching. And ohmite rotary switches for the low current switching

Thank you for the response. I look forward to seeing the video so I can convert mine over.

I understand, im sorry if I came off the wrong way. I would need 120/208 which I believe is wye or star low volt configuration. I already know how to convert it from either 120/208 or 240/416. I would be going back and fourth from single to 3 phase often. So a mod like I first mentioned would...

Thanks for all of the Reponses. Ok yes I know for a fact that I have a 30kw load on the main panel for extended periods of time. I have a fluke clamp on current meter which tells me exactly what I have on each 120 volt leg. As for wet stacking I know exactly what it is and have the optional...

conversion Thanks for the reply, From what I understand the mep 004 and 005 use the same reconnection board, voltage regulator and thermal watt converter. So if I do this mod to my generator then the same could be done to the two smaller generators. You would think that the mep 006a is kinda...

Has anyone thought about using a 3pdt relay and a couple large contactors,To make switching from single to three phase possible by just flipping a switch. It can easily be done with relays and contactors with 24 volt coils.The only problem is what if one of the contacts develops a poor...

are these mods the same for a 60hz mep 006a

Do you still have one set of doors left with working locking mechanisms. I need the set of doors which are closest to the main output power terminal board with the split bolts. Im also looking for the safety cover which covers these connections.