• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

HDN's latest activity

  • HDN
    HDN reacted to alburms311's post in the thread Diesels and vacuum.... with Like Like.
    Thanks for that last part Warthog, I was going to ask if that could be done for future reference. Had I started my vehicle without...
  • HDN
    HDN reacted to llong66's post in the thread Diesels and vacuum.... with Like Like.
    Im not sure if this is the right place for this, but seeing as I have a M1008, Id start here. Why dont diesels have the vacuum to run...
  • HDN
    HDN reacted to Warthog's post in the thread Diesels and vacuum.... with Like Like.
    Diesels don't create a vacuum because they don't have a carburetor/throttle body. It is the Venturi effect that actually creates the...
  • HDN
    HDN replied to the thread M602, modified M35.
    Welcome to the site, and thanks for sharing your truck's story with us! That's pretty neat that the army did an engine swap. Did the...
  • HDN
    HDN reacted to Diego Tex's post in the thread M602, modified M35 with Love Love.
    Good morning everybody. The topic is very old, but I'm going to participate, even to register for later research. I have a Reo M602...
  • HDN
    HDN reacted to rdixiemiller's post in the thread M602, modified M35 with Like Like.
    I bought a manual for an "M602, modified M35". TM9-2320-215-24P. I though it might be a manual for the Norwegian variant, I was wrong...
  • HDN
    HDN reacted to 3rdmdqm's post in the thread D Turbo with Like Like.
    If this is helpful for anyone, original service kit for this model turbo was listed as #194397. This can apparently be replaced by...
  • HDN
    HDN reacted to 3rdmdqm's post in the thread D Turbo with Like Like.
    Also, quick tip - when tapping the turbine housings to separate them from the shaft/turbines, leave the bolts that hold the haves...
  • HDN
    HDN reacted to 3rdmdqm's post in the thread D Turbo with Like Like.
    As promised....just finished tearing down the old turbo. Was a pain getting the halves apart, had to soak it for a few hours in PB...
  • HDN
    HDN reacted to Paweł's post in the thread Curious old M49 fuel truck with Like Like.
    @msgjd , @gringeltaube - thanks a lot for the cool infos! So I'll have to mount the headlights low - that will make my model look...
  • HDN
    HDN reacted to johan77's post in the thread Muffler gasser 0a-331 with Like Like.
    Yes, but the original pipe was cut off, they used the 3 hole flange and went from there with regular steel tubing.
  • HDN
    HDN reacted to johan77's post in the thread Muffler gasser 0a-331 with Like Like.
    Thanks a lot , now i know to intstall it correctly , should be more quiet when running haha
  • HDN
    HDN reacted to gringeltaube's post in the thread Muffler gasser 0a-331 with Like Like.
    Front exhaust pipe section (between engine and muffler) is 2-3/4" OD and what follows passed the muffler measures 2-1/2" OD.
  • HDN
    HDN reacted to gringeltaube's post in the thread Curious old M49 fuel truck with Like Like.
    I'm not sure - did the fuelers ever come with a winch ?
  • HDN
    HDN reacted to msgjd's post in the thread Curious old M49 fuel truck with Like Like.
    somewhere in my picture collection there is one with winch while in service .. would be a very rare situation .. i have never seen one...
Show older items
112,195members
165,986threads
2,337,043posts
805online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks