Recent content by heftybuilt

I broke my harbor freight ball joint press so I broke down and bought a snapon one

I would have to say that lift blocks in the front would not be a good idea. I have been lifting trucks for 10 years and would never recommend this and in some states it is illegal. As far as in the rear I would not go more than 3 in blocks and if you do I would install some traction bars to...

I have brakes again. Thanks for all the help from everyone the problem was the rear shoes were paper thin [thumbzup]

top is separated at the front its a soft top

I need to fix the seat and get a new top and fix some minor rust also like to convert the rear wheels to singals with hemit rims and bigger tires all the way around.

yup I understand what must be done and plan on checking all the brakes. I have a feeling that they are out of adjustment or thin. I used a psi bleeder today and I had no luck so I checked the front shoes,springs,wheel cylinders and they were good. I had adjusted them properly so this week I plan...

I have a pressure bleeder that i use at work for brake flushes so I plan to lube the air pak and bleed the system again aua

let me start by saying I bought my first deuce and was able to get it for a good deal but it had no brakes. It came with a new master as it was leaking when I bought it so I installed it and blead the system. I still have no breaks unless I pump the pedal a few times. Is it possible my air pac...