Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Just did the battery relocation. I need some grommets for the back of the box, so the edge doesn't wear through the cables. Took about 5 hours. Pulling the seat and bench tomorrow.
Today i turned down the idle on my injection pump. So, easy! Do this with the engine off. Remove the brass hex head bolt under the fuel line connection. Mine had a safety wire through it. Reach inside with a regular screwdriver and screw in or out. I turned mine a couple of turns...
Nice pics! Found a puddle under my 5ton this morning. Traced it back to the top heater petcock. Closed both petcocks, but still dripping a little. Added 1.5 gallons of coolant to the expansion tank. Is the coolant system supposed to be pressured when cold? I think I will use your tips and...
Did you also change the seals? Is it possible to only need to change the boot? I don't see gear oil, only grease around the broken boot. I guess I will know more once I see the inside of the drum.
While replacing my steering wheel today, I notice my front drivers side axle is a greasy mess. Looks like that's next on my list. Thanks for the info MO MV man!
Sometimes my M923 starts right up, sometimes it don't. I plug it in to a 24v jumper and it fires. I guess one or more of the original batteries are toast. I think I'm gonna do the two batteries in the side box trick. Have the batteries. Also have several adjustable hummer buckets and a 12v...
I have been making and mixing fuels for many years. Run it in a variety of truck types. See the pics of my latest generation refinery. Your truck will burn anything that makes a BTU. However, some caution should be taken. WVO should be cleaned and free of animal fats. My final filter is 5...
Great Idea! I need a taller boarding ladder too! I will make it out of aluminum. My spool gun works, OK. (Miller) I just bought two push pull machines just for aluminum!
M923: Media blasted and powdercoated 6 two pcs. wheels flat black. Powdercoated all the wheel nuts and lug nuts olive drab. Remounted 6 new 395/85 R20 tires. Installed the antenna and tied it down. Installed a single pin nato end on my 24volt charger. Charged the batteries with it...