• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Jbulach's latest activity

  • Jbulach
    Jbulach reacted to 98G's post in the thread M925A2 reverse issue with Like Like.
    With the diffs, I'd check the drain hole instead of the fill hole. There might be good clean lube on top of water.
  • Jbulach
    Jbulach reacted to ErnieAD2's post in the thread Gar Wood 3U615 winch with Like Like.
    robzet123 gave me a contact of "Robert at Sam Winer Motors in Akron Ohio". Robert was very helpful too, so thanks again.
  • Jbulach
    Jbulach reacted to aw113sgte's post in the thread So the MTVR adventure begins with Like Like.
    So repairing the TIM is possible. There is only 1 proprietary component on the board - the PIC microcontroller. Everything else seems to...
  • Jbulach
    Jbulach reacted to WillWagner's post in the thread The next Project an ASMH with Like Like.
    Okay we're getting in the short rolls. This is probably going to be one of the last updates on this Beast. Couple of weeks ago we got...
  • Jbulach
    Jbulach reacted to NDT's post in the thread Gar Wood 3U615 winch with Like Like.
    This seller I believe is the world's foremost expert on these winches, might be worth your while to reach out to them for a parts kit...
  • Jbulach
    Jbulach reacted to WillWagner's post in the thread Another Museum Project! with Like Like.
    Just an update on the fuel tank. We have a new cradle. For the most part of last week, it rained here like a cow pizzin on a flat...
  • Jbulach
    Jbulach reacted to 98G's post in the thread M925A2 reverse issue with Like Like.
    The military frequently used 15W40 motor oil in the transmissions. I'm reluctant to change transmission fluids without overt need...
  • Jbulach
    Jbulach reacted to SailorJoe's post in the thread 1954 IHC M54 T&P Mobile Gas Station with Like Like.
    Currently a work in progress, just need to get the tanks strapped down to the bed and wire up the pump unit.
  • Jbulach
    Jbulach replied to the thread M925A2 reverse issue.
    Do you have any more info/description on “play in the shifter cable”, or “not going into reverse smoothly”? IE, did you have to work the...
  • Jbulach
    Jbulach replied to the thread M925A2 reverse issue.
    Theres no chance the transfer-case was in low range is there? I believe there was an MWO that installed a low range reverse lockout on...
  • Jbulach
    Jbulach reacted to NDT's post in the thread M925A2 reverse issue with Like Like.
    If the shifter is not placing the valve body control into the full detent position, this could cause anomalies. This “slipping” upon...
  • Jbulach
    Jbulach reacted to Paweł's post in the thread Curious old M49 fuel truck with Like Like.
    Hello everybody! I've got one more question - looking at the photo of the real thing (on top of page 1) it seems to me that it doesn't...
  • Jbulach
    Jbulach reacted to silverstate55's post in the thread M246 Revival with Like Like.
    It’s been In The Wild for some time…here’s the last stenciled load test on the shipper:
  • Jbulach
    Jbulach reacted to Paweł's post in the thread Curious old M49 fuel truck with Like Like.
    Hello! @HDN - thanks a lot for your comment! I think you're right. After you pointed it out I even found the right part in the kit...
  • Jbulach
    Jbulach reacted to Mogman's post in the thread DEAL OF THE WEEK!! with Like Like.
    My deal of the week is a NOS 10.5K Mile Marker hydraulic winch. It used to be they sold a kit with a valve etc, now they sell the valve...
Show older items
112,171members
165,985threads
2,336,831posts
862online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks