-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
juanprado's latest activity
-
juanprado replied to the thread brake shudder question.A shudder to me is a vibration. Are you also feeling it in the brake pedal? If so that is a classic symptom of an out of round uneven... -
juanprado replied to the thread brake shudder question.I would suspect rotors or attaching hardware. Pads were probably changed but not rotors and unlikely they were turned as very few auto...
-
Just sharing my new plates. Had to get creative and think we did pretty good!
-
juanprado replied to the thread HMMWV Rolled on I75 North of Cincinnati.I wish all a speedy recovery. One of the pics shows tire debris from a tire blow out but is it from this or previous garbage on the...
-
juanprado replied to the thread Keyed Switch.My low tech solution is to leave it in gear when I shut down.........
-
juanprado replied to the thread Seat belts.Depends on the model. The latest ones for example are 2 separate belts that both buckle in as opposed to the early ones that waist and...
-
juanprado replied to the thread 2007 M1097R1 Project - New member introduction.Correct part numbers are k500247 & k500248 for ball joints
-
juanprado reacted to texas-alex's post in the thread Fuel Injection Pump Slow Drip -- Anything to Try Before Removing the Pump? with
Like.
Hey all, sorry to resurrect a dead thread, it took me a little longer than I care to admit to get around to doing this seal replacement... -
juanprado replied to the thread Anyone Looking For Parts?.Several of those prepositioned ships live on the Mississippi River ready to go on short notice.
-
juanprado replied to the thread M116A3 Wheel Seal Part replacement.Timken national oil seal 472920 seal is a civy part and out there in google world....
-
juanprado replied to the thread Transmission Filter.O" reillys also sells Dexron 3 in their brand in the gallon. I have a nos filter reasonable if interested as I do not have a 4spd...
-
juanprado replied to the thread Squeaky belt.so in another lifetime I sold parts. We had a simple way to help people determine if the belt or component was the issue. Use a plain...
-
juanprado replied to the thread Squeaky belt.Mine is older M998 so I am not familiar with the serpentine belt set ups but there are many posts on here with the information depending...
-
juanprado replied to the thread Squeaky belt.I assume you have the 6.2/6.5 with v belts? check this thread for belt numbers and matched set information if not familiar with the...
-
juanprado replied to the thread Squeaky belt.Yes but it is masking the real problem probably. The rubber is older and deteriorating. The belt dressing is lubricating & softening...