• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Recent content by jworth94

  1. J

    fuel aditive in your tank

    Stanadyne... Performance Formula - Stanadyne
  2. J

    M1009 Antenna and Antenna Base

    Thread creep... I know. Can that antenna be used with a CB radio?
  3. J

    doghead starter relay modifcation

    Someone needs to answer Ert's question. I think he's asking why a 12 volt relay is being used in lieu of a 24 volt one.
  4. J

    Cheap china starter relay vs. more expensive, more reliable U.S.A. made relay

    Gee Doghead, I thought a PM was PRIVATE! Now I know you've gone beyond your authority. I stand by my position that you should lose your moderator priviledge. Of course, you'll delete this message and tell me it's off topic. It's nice to know that as a moderator you can post anything you...
  5. J

    Cheap china starter relay vs. more expensive, more reliable U.S.A. made relay

    Well, let's hear it guys (and girls). Which would you rather put in your truck???? A. cheap china made starter relay (NAPA 7-01860-1) or... B. more expensive (possibly double the price) and potentially better relay made in the USA? I'll be the first to vote. B !!!!! and here's...
  6. J

    doghead starter relay modifcation

    The Napa part mentioned early in the post (part 7-01860-1) is made in China. It has a Trombetta sticker on it and it says "made in China".
  7. J

    doghead starter relay modifcation

    Can anyone find a relay that ISN'T made in China. If you know of one, I'm interested.
  8. J

    Do I need to pull my tranny out?

    You probably thought of this already, but did you adjust the vacuum modulator? Out of the box, they seem to shift very high. I turned mine 6-8 turns out... Jon
  9. J

    Shift lever bushing... I need a picture!

    Thanks Joe. Jon
  10. J

    Shift lever bushing... I need a picture!

    Thanks, now I have to figure out how to fix mine. In your 3rd picture, the spring is compressed against the arm and the frame support. Does the bushing go between the spring and the support? The arm on mine goes completely through the support and the spring is uncompressed. Thanks for...
  11. J

    Shift lever bushing... I need a picture!

    My 85 M1008 is in need of a bushing (underneath the truck prior to entering the transmission) and possibly some other parts. I don't have a bushing on the control rod and need to know where it should be installed and hopefully get a picture or schematic to help me see the original setup. I've...
  12. J

    Glowplug Controller

    I bought one off the previously mentioned site. It works great. I paid around $60 delivered. If you do some hunting, you may find someone on here willing to part with one. Good luck. Jon
  13. J

    Looking for a towbar in the Va. Beach / Suffolk, VA area

    Looking for a cucv towbar that I can borrow/rent/buy in my local area. Thanks, Jon
  14. J

    Eastover, SC Deuces

    I guess I'm looking for your experiences, good or bad from the Eastover site. Are they on par with everyone else. Was your vehicle as advertised, etc.
  15. J

    Eastover, SC Deuces

    If you had to do it all over again... would you buy another deuce from Eastover?
Top