• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

kloppk's latest activity

  • K
    kloppk reacted to BeStihl's post in the thread MEP-803a Measuring current on L1 in 120/240V with Like Like.
    I must apologize for not taking your word on this account. I ran my set tonight with an imbalance of 31A-L1 & 21A-L3and the PRC read 50%...
  • K
    kloppk replied to the thread No AC output.
    If no power to the lugs with the contactor switch in the UP position. Then... Here is a diagram of how the coil in K1 is powered while...
    • 1746309279368.png
  • K
    kloppk replied to the thread No AC output.
    Do you get power to the lugs when running AND you are holding the contactor switch up?
  • K
    kloppk reacted to Light in the Dark's post in the thread No AC output with Wow Wow.
    It certanly isn't the best methodology... but you also have to be cognizant of the fuses used. Sometimes folks take shortcuts in making...
  • K
    kloppk reacted to jamawieb's post in the thread MEP004A Voltage Regulator/Exciter BBQ with Like Like.
    Ive converted several units over with the advr-054 and marathon se350 vrs. The sx460 would work fine. Two install options, 1st is to...
  • K
    kloppk reacted to Ray70's post in the thread MEP-802A questions with Like Like.
    On the o-ring gasket, there are 2 of them, however in your picture the 2nd one is still inside the block. That tube is a short stub with...
  • K
    kloppk reacted to jamawieb's post in the thread MEP 803A Fix-up Thread with Like Like.
    These motors are extremely easy to rebuild. I can usually tear one down and replace the rings, being back up within 6 hours, 45minutes...
  • K
    kloppk reacted to Ray70's post in the thread No AC output with Like Like.
    Now I'd try a continuity test from VR 5 and 6 to F+ and F- on the exciter board ( item #10 ) as Kurt indicates in his chart above. If...
  • K
    kloppk replied to the thread No AC output.
    OK, your test h. result of 22.7 VDC confirms my suspicion that there is an open circuit from VR terminals 5,6 and the static exciter or...
    • 1746199478935.png
    • 1746199629223.png
    • 1746200074595.png
  • K
    kloppk reacted to 240hippie's post in the thread No AC output with Like Like.
    Thank you. I will not be able to perform this today, maybe not until Monday. We have major thunderstorms on the way. Hail last night. I...
  • K
    kloppk reacted to CallMeColt's post in the thread MEP501 28v to 120v with Like Like.
    Like I said, there is NOTHING the same on these two generators electrically. You need to make everything yourself. Even a MEP 531A...
  • K
    kloppk replied to the thread No AC output.
    The image you posted is not the AC VR Test in the TM. That's a brief cheat sheet without the needed steps and conditions to correctly...
    • 1746194751529.png
    • 1746194779898.png
  • K
    kloppk replied to the thread No AC output.
    It would ready help if you performed the AC Voltage Regulator test per the TM. It has the expected readings for each test. The 17.4vdc...
  • K
    kloppk reacted to Ray70's post in the thread No AC output with Like Like.
    For future reference you can go to the top of the forum page. You will see a bar with "Rules" "TM" and "Vendor Spotlight" listed...
  • K
    kloppk reacted to Ray70's post in the thread No AC output with Like Like.
    Section 2-27 on pages 95/96
Show older items
112,774members
166,305threads
2,342,283posts
861online users
Top