-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
LuckeyD's latest activity
-
LLuckeyD replied to the thread NSN's for Door & handle for a MEP 802A generator.Me a lowly little Retired 2 Maintenance MOS Warrant Officer who made CW4 with 3 masters degrees and 4 master mechanic certs and a...
-
LLuckeyD replied to the thread MEP803A - 0W40 Oil.Good day: In the words of my mentor; GOOD DEAL! I have been using 0W40 in my private autos for 20 years. I also live in Europe...
-
LLuckeyD replied to the thread Mep 804b Alternator regulator.I got that multimeter at SEARS at FT Bragg. Worked for a while, but nothing beats the Fluke 112 or 175
-
LLuckeyD replied to the thread MEP-805B low oil pressure issue.Good Day: Had to read this all several times. Lets mess it up a bit. A B model TQG using a JD engine shutting down after 4 Hours...
-
LLuckeyD replied to the thread MEP-006A Need advice.Good Day: You can test if this is the issue. Use the info Guyfang posted and find the 006 schematic. Its hairy. Without research i...
-
LLuckeyD replied to the thread NSN's for Door & handle for a MEP 802A generator.Some of these attached could be helpful. Got one for every size gen
-
LLuckeyD replied to the thread ISO Front Fuel Tank Panel.I have seen several battery issues. Attached are batteries to generator listing. If no one has an extra front panel let me know as I...
-
LLuckeyD replied to the thread Question on an S6.I played with these and eventually you get it to work again. If you get tired look into PN: 31907LW for a newer one.
-
LLuckeyD replied to the thread Mep 804b Alternator regulator.OK, there was no parts they put in the Gen manual or engine manual for the Battery charging alternator regulator from Hitachi on the B...
-
LLuckeyD replied to the thread Mep 804b Alternator regulator.I recommend you research posts Guyfang posted. He posted everything you need. Step 1; What type do you have, TRC or Libby. (TRC...
-
LLuckeyD replied to the thread mep803a voltage regulator schematic - anyone got one?.Fermont built the 803. As Guyfang and others have said, cheaper to throw away, and get a newer one that works. The schematic in...
-
LLuckeyD replied to the thread HVAC advice - 10kw Heater kits and MEP803.Good Day: Not intelligent, but here are a few tips. MEP803 is just a 10KW gen. If everything is 120/240 in your house, set it on...
-
LGood Day: Was asked to look around in the forum and help where i possibly can. I have the FFF on the keyboard. Was around GI Joe land...