Recent content by MakeReady

Ok thanks for the feedback NDT and Keith - I will connect busbars to the front battery and from there to my new fuse blocks. I am looking for some high saturation ferrites for EMI filtering as well that will connect to each fusebox feed (currently one for the front cab and one for the rear cab)...

UPDATE: I maybe stepping into it here - I was just looking at the batteries and the rear battery negative is not chassis ground (12v potential there), whereas the front battery negative terminal is chassis ground. So it appears I will have to use the front battery to establish a 12v distribution...

Hi SS Community - MakeReady in Texas - Just finishing a bunch on interior upgrades including radios - lights etc... I am adding a 12V Only power distribution block or two in the front and back of cab. Question: Is there any known preference for which battery I would draw the 12V feed to the...

Thank you OD Fever! Just saved me a lot of time looking for some of these replacements - much appreciated and have a great Holiday season.

Yo - I missed that it’s a 67 - M715 Kaiser - I will get some more pics up - I put a V8 in it and had a wrap put on - But haven’t done anything to the interior yet - will Tackle this next spring.

Hi gents - first post and glad I found this site. Been dabbling with the Mil Jeep / Truck vehicles for a few years. Basically bought and parked at the ranch (Lived and worked in large Metro until recently). Needless to say with things changing so rapidly I want to assure vehicles are all to...

That is a great story - surely a good ride home.