• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

MEPNoob's latest activity

  • M
    MEPNoob reacted to Scoobyshep's post in the thread Mep-807a issue with Like Like.
    Make sure you cap off that yellow wire. Good find. Congratulations. Sent from my SM-S908U using Tapatalk
  • M
    MEPNoob replied to the thread Mep-807a issue.
    So you guys can visualize what I did. If anyone needs to know how to do this just send me a message I’m glad to help
  • M
    MEPNoob replied to the thread Mep-807a issue.
    So just to give you guys an update I got the gen running again flawlessly it turns out the control board has an internal relay board...
  • M
    MEPNoob replied to the thread Mep-807a issue.
    Cranks no start the computer doesn’t tell the injectors to fire
  • M
    MEPNoob replied to the thread Mep-807a issue.
    Well got the genset sorted out after reprogramming the Dvr but not the motor only runs when it wants I thought it was the ipr valve and...
  • M
    MEPNoob replied to the thread Mep-807a issue.
    Never mind I went back out there and reprogrammed the dc controller and she fired right up no faults codes and no over current. She’s...
  • M
    MEPNoob replied to the thread Mep-807a issue.
    So went out there today to mess around with the genset and couldn’t get the sucker to run now. I cleared all the codes and tried...
  • M
    MEPNoob replied to the thread Mep-807a issue.
    Thank you for the positive post and information I appreciate all you guys for all the information and help
  • M
    MEPNoob reacted to LuckeyD's post in the thread Mep-807a issue with Like Like.
    Good Day: Well a 300 AMP service. Cool. What everyone is thinking about is this 100KW has a 66 gallon fuel tank. At full load this...
  • M
    MEPNoob replied to the thread Mep-807a issue.
    Well what it says on screen haven’t checked outlets or terminals
  • M
    MEPNoob replied to the thread Mep-807a issue.
    Says it’s Generator Over Voltage
  • M
    MEPNoob replied to the thread Mep-807a issue.
    Shuts down immediately but if you hit the battle short it runs no problem and makes power as it should
    • IMG_0067.jpeg
  • M
    MEPNoob replied to the thread Mep-807a issue.
    Went back out there and got fault code AL 7
  • M
    MEPNoob replied to the thread Mep-807a issue.
    Agreed
  • M
    MEPNoob replied to the thread Mep-807a issue.
    I appreciate it. No worries I’m a good sport, only reason I purchased it was because it was a steal, I paid 3k for it so I figured what...
Top