• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Mogman's latest activity

  • Mogman
    Mogman replied to the thread New to me M1114.
    Of course make sure there is nothing else connected to the "outside" of that stud but for the 1-0 cable to the alt.
  • Mogman
    Mogman replied to the thread New to me M1114.
    Yes it can, just run a 1-0 cable from the extra stud to the buss bar, also see if you can locate wires 2A and 56B (could be 5A)
  • Mogman
    Mogman replied to the thread New to me M1114.
    Start by counting the big wires going to the buss bar, you should have one to the starter, one to the alt, one to the slave connector...
  • Mogman
    Mogman replied to the thread New to me M1114.
    So it looks like there should be a wire going from the buss bar to the 200A alt, it is marked as a 1-0
    • buss bar.JPG
  • Mogman
    Mogman reacted to 86humv's post in the thread New to me M1114 with Like Like.
    Thats not Hmmwv...its for Big Oshkosh trucks
  • Mogman
    Mogman replied to the thread New to me M1114.
    OK that makes sense, I am the one confused, a snapshot of my life now :oops:
  • Mogman
    Mogman replied to the thread New to me M1114.
    EDITED to seem like I am coherent I have never had my hands on one but the extra post would make sense, there should be a large cable...
  • Mogman
    Mogman replied to the thread New to me M1114.
    If your truck had a 400A alt. then you will have two positive cables, one inside the engine harness and one completely independent of...
  • Mogman
    Mogman reacted to Mohawk's post in the thread New to me M1114 with Like Like.
    Big thanks to you @Mogman...your diagrams helped me figure it out....much appreciated!
  • Mogman
    Mogman replied to the thread HMMWV M1097R1 specific.
    Treat it as a M1097A2, the wiring is as stated a little different. If the GVWR is 10K then you have the 10K hubs brakes and half shafts...
  • Mogman
    Mogman reacted to HUMMER H1's post in the thread OUT AND ABOUT WITH MY HMMWV with Like Like.
    looking for petroglyphs in the desert. Posting pictures using my starlink mini.
  • Mogman
    That bar behind the seat is for things like shelters to land on and for the 2 door "pickup" fill plates to attach to, the civy models do...
  • Mogman
    I purchased mine from a WY guy and it was already titled. But transferring that and getting it plated wasn’t difficult. No different...
  • Mogman
    Delaware will register, title and tag HMMWVs as a commercial. Some of the DMV workers are uninformed on the process though
  • Mogman
    Mogman replied to the thread testing starter solenoid.
    As far as I know there is no real way to test it off of the starter, the plunger retracts as it pushes the starter drive into the...
    • Starter.JPG
Top