-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Mogman's latest activity
-
Mogman replied to the thread FLU419 electrical issues.Do you have good power to the rest of the truck, head lights etc? -
Mogman replied to the thread 1987 M998 Fuel Pump Help.Did the red fluid come out of the vent side or diesel side of the pump? You should check the transfer case first to see if it is over...
-
I would change your oil & filter plus verify your transmission fluid level.
-
Mogman replied to the thread FLU419 electrical issues.I almost always test circuits with everything connected, you can get "good" voltage on a circuit when disconnected from the load for it...
-
Mogman reacted to Gastrap's post in the thread What have you done to your HMMWV today/lately with
Like.
Fixed a KDS S3 box that was in the back of my truck when I bought it, I had tried it and discovered pretty quickly the start relay was... -
Thanks for the info. I must not had my hand in the right place.....
-
Mogman replied to the thread Duramax Conversion.How are you coming with this conversion? I was wondering if you were able to make the late model fuel tank work, I bought one but ended...
-
Mogman replied to the thread M1097 A2 Whining noise coming from the.That is definitely a hydraulic pump noise, could be the trans but most likely the steering pump, some are just noisier than others, if...
-
Mogman replied to the thread M1097 A2 Whining noise coming from the.Sounds pretty normal to me for a truck with the remote PS reservoir, maybe a little more pronounced than usual, but does not sound like...
-
Leave the check valves out this time
-
Hello, I am a volunteer at the New England wireless and steam museum in East Greenwich RI. We have an excess amount of military radio...
-
Mogman replied to the thread testing starter solenoid.What are you going to test? the solenoid will not do anything without the plunger being installed so it can slam into the back of the...
-
Mogman replied to the thread HMMWV starts then stalls.One other thing that you did not cover, have you made sure the return line is not plugged, if the IP wires being switched does not pan...
-
Mogman replied to the thread Hood rub blocks on fender.Just put one hand on the bolt and then try to touch that hand from the inside, should be able to do it with your eyes closed.
-
Mogman replied to the thread Hood rub blocks on fender.The nuts are inside the cab, not all that hard to get to, I change them all the time by myself and I am really old. EDIT, without the doors