Recent content by motas2002

Yes, it was bench bleed.

Hello everyone, I am hoping someone can provide some insight into the difficultly I am encountering. I am working on a 2005 M1114 with my father. When we received the truck it is in relatively good order. The brakes on the other hand are giving us grief. When you push on the pedal, you get...

I removed that to check function after I noticed no fuel coming out of the line. No fuel will come out with it removed also.

Would that be anything that I could have done on my end or a defect from the manufacturer?

So took another look at it after taking a break from last night. Here is what I have now. Meter reads 24v at the wire to solenoid at run position for both leads, 6v when it is off. Touch wire from alternator to solenoid and can hear audible click for both posts on top of pump. Bypassed lift...

Meter reads 22v at the wire to solenoid at run position, 6v when it is off. Touch wire from alternator to solenoid and can hear audible click.

Thanks for the reply, I will try that when my second set of hands gets home in a little bit. As I have been poking around on some other threads I have developed another question. I thought I has sufficient fuel going to the pump but to double check, I pulled the line going to the back of the...

That is unfortunate to hear. Is there something that I can do to diagnose the pump if that is indeed the problem? Or perhaps another area to look at to rule out anything else? Thanks.

Hello everyone. I am hoping the group can help me with this problem. I have a 1993 M1097 that I purchased at auction. I get it home and discover the injection pump is bad. I remove and replaced the injection pump with a rebuilt pump from DCP. I installed the pump and got it running while the...

Is that what you do or is yours registered?

Has anyone taken advantage of the small fleet exemption for smog to not need to retro fit the engine?

Hello everyone, What has been every ones experience trying to register a LMTV in CA? I have a deuce that is registered as a classic but would like to use a lmtv without those restrictions. Please let me know what pitfalls to look out for. Thanks John

i spend quite a bit of time in the reno area.

welcome. i am just up the road from you in auburn.

we are almost neighbors. i am up in auburn, ca currently.