-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
mrandig's latest activity
-
Engine temperature sender to work the dash gauge. It all there... wires and all, just busted That's a hot topic, CAMO I just looked... -
They've been selling the Enforcer MT line since at least 2020 and have been available surplus for several years from Feltz...
-
Maybe this can help some folks who are equally in shock by that price: bought quite a lot of rubber from Colony Tire out of Norfolk...
-
mrandig replied to the thread Fixing the 1998 HMMWV.Water pump installation Time to break out the caulking gun again. I guess it's probably more appropriate at this point to just call it...
-
-
mrandig replied to the thread Fixing the 1998 HMMWV.Torque values (2) Some oldies but goodies. Before we get this truck buttoned up and ready to roll out, I wanted to check some of the...
-
-
mrandig replied to the thread Fixing the 1998 HMMWV.When we started working on this truck, time was measured in the number of days this project should take; now we've reached a point where...
-
-
mrandig replied to the thread Fixing the 1998 HMMWV.Torque values (1) As I'm putting everything back together, I'm just going to note the torque values (and wrench sizes). The torque...
-
-
mrandig replied to the thread Fixing the 1998 HMMWV.Swimming? As in with or without a DWF kit? That actually explains many of these issues. Dirt where there shouldn't be, rust where there...
-
mrandig replied to the thread Fixing the 1998 HMMWV.Torque wrenches Time to start putting things back together. But first, we need to begin by setting the table. My take on setting the...
-
-
mrandig replied to the thread Fixing the 1998 HMMWV.Agreed. I'm going to put everything back together and see how it fits without. If it needs a shim, that's easy enough.
-
mrandig replied to the thread Fixing the 1998 HMMWV.Power steering pump removal Not my finest hour. But as I keep finding myself saying, at least it's done now. I was going to install...
-
-
That washer is about as unique as can be. I have a suspicion its function is to locate the washer behind the plate as it is reinstalled...
-
mrandig replied to the thread Fixing the 1998 HMMWV.Power steering cooler, hydro-booster, and fan clutch hydraulic lines Since I've got some room to work now, I'm going to replace the...
-
-
mrandig replied to the thread Fixing the 1998 HMMWV.I don't know about TN, but here in TX finding random hardware like this is becoming more hopeless by the day. The mom and pops have all...
-
-
I think there is a hardware store in Houston...................................................................
