Recent content by mrjeffa

Does anyone know how to remove heater cover, I need to see if I am getting power to the switch and check fan motor, circuit breaker is good, took out all screws on cover, removed small Allen head in fan knob. I cannot figure out how to get the cover past the other 3 knobs. There are no Allen...

Thank everyone for there information, took the brake canister off the matching trailer and used the internal parts matching the threads off the one I took off. New tire and no air leaks back on the road. I'm going to look into the part get the trailer back on the road. Again thanks. Sent from...

I have a matching trailer, and I took part out of it. I believe all it is all good. Tire is getting installed tomorrow. Wish me luck. Found a part # on broken part. Sent from my SM-S908U using Tapatalk

The new one came with everything, this is the piece the end fits into to the brake side, I bent the old housing, and it broke off 1/4 inch of the part that goes into the brake caliper side it has two rollers on the end. So it's the engagement part between the air canister and the brake system...

Does anyone know where I can purchase this rod assembly for my m1083 6x6? I purchased the new brake air chamber this is for the rear axle drivers side, I thought it would come with it, it did not, this is the piece that goes between air chamber and the brake caliper to ingauge. Air chamber...

That is what I want, found the whole system on ebay, 4800.00, only have to run the ac lines, hi pressure, and low pressure. But it comes with the end connectors. Sent from my SM-G986U using Tapatalk

Thank you for the response. Sent from my SM-G986U using Tapatalk

Got it from gp. Sent from my SM-G986U using Tapatalk

Thanks for that information, I purchased 2 pallets of sound deadening covers, I thought it was stick on, but it's thicker than expected I was expecting to put it in the truck. but end up purchasing something newer so if you know somebody that needs it have 2 pallets of it they are 40 by 40 x 48...

Ronmar, I am only doing 2 31's I believe from our conversations this is the right thing to do. Just making sure. Sent from my SM-G986U using Tapatalk

I want to put air conditioning in my 1998 m1083 6x6, what is the best option? Gen 2 upgrade running off the motor, or a back unit 24 volt, I only have heat now.

I live in Texas, we Run spicer here, most of the parts houses have them, napa.com, always our go too. you can get everything from them. Blue spicer we use up to 400hp, purple 400+ hp. We do alot of muddy here. Hope this helps. The other brands are new to me. I am going to check them out. Sent...

I am going tomorrow to purchase, and clean all grounds, and put battert kill switch in. Sent from my SM-G986U using Tapatalk

Meritor, I am not familiar with, I have always run spicer, I even have updated driver train in my polaris 1000 rzr to Spicer u joints, Sent from my SM-G986U using Tapatalk

That is Anti-seize, It prevents the drive shaft and the knuckle from seizing together that's why it's coated Sent from my SM-G986U using Tapatalk