-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
msgjd's latest activity
-
msgjd replied to the thread Fuel Return Line Pressure?.several years ago i pulled a 290 out of an M818 dump conversion that is (still) missing the cover plate on the side of the PT pump as... -
It is part of the "tamperproofing" With the nuts missing could engine vibration over time have worked the screw and throttle shaft out...
-
msgjd replied to the thread What have you done to your 5 ton this week?.for a long time i have done it to brake cables (civilian & mil) and hydraulic valve cables on heavy equip by stuffing one end into a...
-
New cable arrived and it's a very good quality cable from the feel of it. Does anyone here recommend lubing the cable up with cable...
-
The M621 and XM778 military trucks are united by the ability to lock all three driving axles of trucks, the differences between these...
-
msgjd replied to the thread XM-778 2 1/2 ton Cargo Truck, W/W.yes, that was the only noticeable feature .. externally, the norway truck looked like any other M35A2 except it having M34-style rear...
-
Pay special attention to this photo!?!
-
Hopefully they have something like that near Cheyenne. Back when I was still in the service, I needed to get my A&P license. I had to...
-
Having several military radios, like you I wanted to be able to legally use them, so a few years ago reloader64 and I decided to get our...
-
I’m in the early stages of learning about radios. I’ve got a bunch of test equipment and power sources that may help my journey, once I...
-
msgjd replied to the thread Curious old M49 fuel truck.happy easter ! yes, i noticed the nozzle holder is in the spot found on A2's .. but i will tell you there might have been a reason...
-
@msgjd - thanks a lot for your comment, for your kind words and for the photo! Unfortunately I already started putting on some paint on...
-
Thank you for all the great info!
-
I think you can shout farther than a PRC-10 will transmit. If it will work at all. I never had any luck getting them to work...
-
msgjd replied to the thread PRC 10 radios.keep in mind the radios are polarity-specific .. I built a power source adapter for my prick77 and certainly know better, but I was in...
