-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
muthkw25's latest activity
-
muthkw25 replied to the thread My m925a1 build "Brutus".I had the injectors put in yesterday. Went to the local heavy duty truck shop and owner helped me with inner base valve and injector... -
-
muthkw25 replied to the thread M1061a1 restoration.Today I added a Tropicool RV coating to the shelter. Outside temp was 88 degrees, surface temp over 145F!!!! 1 gallon applied, prior...
-
-
muthkw25 replied to the thread Anyone regret goin to 16.00r20 Tires on M923a2?.I'm glad I got away from 53" tires. Had them and switched to MVT 46". Less weight, better control, more power and torque, less wear...
-
muthkw25 replied to the thread My m925a1 build "Brutus".Installed the gear reduction starter with my Dad. That was challenging. 68lb starter in an awkward position isnt fun. One bolt is a...
-
-
muthkw25 replied to the thread My m925a1 build "Brutus".Installed a new thermostat gasket and seal since the housing was leaking. I also replaced the coolant temp gauge. Driving home it...
-
-
muthkw25 replied to the thread My m925a1 build "Brutus".Took Brutus on vacation to Gettysburg. Did 400+ miles towing the m1061a1. Truck did fantastic. Maintained speed well, only dropped back...
-
-
muthkw25 replied to the thread M1061a1 restoration.Took the m1061a1 on vacation to Gettysburg. Trailer did great. No issues. Shelter and cables stayed tight. Plan is to get new rubber...
-
-
muthkw25 replied to the thread My m925a1 build "Brutus".I got it to 150 psi with foot all the way in it. Larger 10% injectors should drop the pressure at little but and a larger button Will...
-
muthkw25 replied to the thread My m925a1 build "Brutus".Took the m1061a1 trailer out. First tow since the turbo build. Truck pulled well. 800 egts on hills max. No temp and fuel pressure...
-
-
muthkw25 replied to the thread M1061a1 restoration.No duals on the front of the 5 ton. 395s all around. We had a ramp to load the tractor off the back of a little hill. Used some steel...
-
muthkw25 replied to the thread M1061a1 restoration.Got the shelter painted with 2 coats of lusterless marine corps forest green. New reflectors. Trailer and shelter are refreshed. Going...
-
-
muthkw25 replied to the thread My m925a1 build "Brutus".Picked up a #25 and #22 fuel button. Going to swap in the #25 and might do the #22 depending how fuel pressure is. I wouldn't mind a...
-
muthkw25 replied to the thread M1061a1 restoration.Started sanding the shelter for paint. Cut 2-2x4s and used the pre-existing holes along each side of the shelter. 5-1/2" holes...
-
-
muthkw25 replied to the thread M1061a1 restoration.I got the eyelifts bolted down and got some 5ft long 3/8" steel cables to some 1/2"- 6 inch long turn buckles. All 4 tightened down...
-
-
Thanks. For this size engine and horsepower, Cummins didn't aftercool (at least to the best of my knowledge). Others who have done...
