-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
NDT's latest activity
-
LanceRobson Great comments.....I was in the Marines in the 80's stationed in Okinawa Japan at Camp Hanson 3rd Combat Engineers motor T... -
NDT replied to the thread M1078 Fire Truck with eco hubs.Personally I say you won’t lose enough off road capabilities to outweigh the benefits. More folks will chime in after a while.
-
NDT replied to the thread M1078 Fire Truck with eco hubs.3.5 tons and 270 hp. Your ffs will be tempted to run wide open to scenes. The ECOs will keep your drivetrain in one piece.
-
NDT replied to the thread M1078 Fire Truck with eco hubs.How many gallons are you carrying and what engine do you have?
-
I'm leaning on bad GP's, very little fuel comes out of the injectors. get the truck inside and warm, check those GP's and go from there.
-
NDT replied to the thread Crank no start.He still has 6.2 diesel, not LS swapped.
-
NDT replied to the thread 2nd control box fried......Camoteksystems.com if you don’t want to diy.
-
NDT replied to the thread Wiring, Generator.If you remove the cover on the voltage regulator you will see the ammeter shunt soldered directly to the connector. There was a MWO to...
-
NDT replied to the thread Crank no start.Make 100% sure the glow plugs are glowing good and hot before pulling the injection pump.
-
Yes... You have it figured out. That bolt passes thru the tunnel to the inboard side, above the frame. Same with the positive only it...
-
I had bought a 003a a couple weeks ago and got lucky. It started up and runs great. So I was bitten by the mep bug and bought 6 more...
-
NDT reacted to unitedstatesoffreight's post in the thread Need Transport for 3 HMMWV’s from Yermo to Texas with
Like.
Good Evening, This is Eric with United States of Freight. I've assisted a few members here getting their humvees moved out of Yermo... -
NDT replied to the thread ABQIRONPIG IS BACK IN THE HOUSE!.Some suggestions for using the Steelsoldiers website. First of all, I recommend you post all FMTV related questions in the FMTV forum...