• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

NDT's latest activity

  • NDT
    NDT replied to the thread M35a2 to M275 conversion.
    Nope but right where the 5th wheel goes is the trunnion crossmember so you gotta drill through two layers of frame.
  • NDT
    NDT replied to the thread M35a2 to M275 conversion.
    I did long ago. Have to shorten the frame behind the bogie. No fun drilling the 10 holes through the frame for the 5th wheel...
  • NDT
    NDT reacted to TOBASH's post in the thread BATTERY CHARGER FRIED STUFF...??? with Like Like.
    Coug is 100%. If glow plugs fried then PCB/EESS box is suspect, and charger getting blamed/framed. YouTube contains a lot of crap too.
  • NDT
    NDT reacted to Coug's post in the thread BATTERY CHARGER FRIED STUFF...??? with Like Like.
    If it was incorrectly hooked up, was the wrong type, or wrong voltage, then yes, it is possible to fry the start box. Typically they...
  • NDT
    NDT replied to the thread hood markings.
    These are not tactical or unit markings, they are related to long term storage. For example C/C means condition code. I can’t read...
  • NDT
    NDT reacted to Guyfang's post in the thread MEP026C 28 volts 109 amps good for what? with Like Like.
    Thats good. Because without the solid state ignition, the reliability of the engine is much reduced. I hated this engine before the...
  • NDT
    NDT replied to the thread MEP026C 28 volts 109 amps good for what?.
    Yes it does. I will pick it up tomorrow and get some pictures. It turns over and is all there, that’s all I know at this point.
  • NDT
    NDT posted the thread MEP026C 28 volts 109 amps good for what? in Generators.
    I ran across one of these. OK I know it's gas and loud. Is this usable for some kind of solar battery bank backup recharge generator...
  • NDT
    NDT replied to the thread 1971 M151A2 will still not start (2nd engine).
    If it runs on starting fluid, that rules out ignition and compression, valves etc. Must be fuel related. Maybe the carb float is...
  • NDT
    NDT replied to the thread coil.
    Those 80 yr old Delco coils still work great! Check your points and condenser first.
  • NDT
    NDT replied to the thread M816 Brake issue.
    Make sure the front service gladhand cover has a vent and the line is not capped off.
  • NDT
    NDT replied to the thread M816 Brake issue.
    Which glad hand? Front or rear? The front is which will cause this.
  • NDT
    NDT replied to the thread Hmmwv turret tray.
    Here is what I have.
    • 438C1745-DD33-4CB7-A5A3-9F5583CD09E3.jpeg
  • NDT
    NDT replied to the thread Priming the oil system after hibernation.
    I've always cranked for a few seconds with the engine stop pulled out. Still takes a few more seconds for pressure to register on the...
  • NDT
    NDT reacted to Abram80's post in the thread M1165 ready for pick - Questions with Like Like.
    Things had been extremely busy, so never got a chance to come back and update. Everything went well. I wanted to give a huge shoutout to...
Show older items
113,081members
166,473threads
2,344,369posts
1,164online users
Top