• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Recent content by oliveone

  1. O

    Mep802 small fire repair help !!!

    Hello all here is the lasted. I cleaned up everything and spend a few hours checking other wire and parts in the area. It all looks good. I did a temporary repair (very Temp LOL) and fired it up. 802 was running fine closed the circuit breaker (Not the right word but you will understand) and...
  2. O

    Mep802 small fire repair help !!!

    Mep802 Mice nest small fire repair help !!! Hello been a member for many years and have learned a lot in my time reading here. Live in Kingston NY area and on March 2nd 2018 have and bad snow with lots of high winds. Lost power at about 845 am and went down switch the pellet stove to the...
  3. O

    Trailer move Altanta GA to Kingston New York

    I have just purchased a 5KW on a trailer and need to have it moved to NY. Is anyone coming this way? Any help would be great.
  4. O

    MEP802A load test ?

    the 002/003 are set up different then the new 802/803s. my 803 car run 10KW all day with no issue. if you try to pull way more then the generator rating the generator will shut down and the overload circuit will need to be reset. this could be good or bad depending how you look at it. when I...
  5. O

    Albany NY to ND

    Live just south of Albany NY ( 1 hour) if you send me a PM the dates that you will be in town could stop by to help you load if needed.
  6. O

    802'a from the March 3rd Sale

    Yes some prices went high. look at the coast of a new 8KW with fuel tank, open unit is over $5,000. you could get two used units for less then $2200 is not a bad deal.
  7. O

    Beginner Mep-802a owner with water in exhaust has questions

    Looking at a few 802a. hope that yours will run with some work.
  8. O

    Mep. 802a dials

    If the only issue you have is the selector switch you are doing great. In a pinch could you a small pair of vise grips.
  9. O

    MEP-802a & 803a

    having a few spare parts will never hurt. Looking to get a few 802a to build one good one.
  10. O

    Mep. 802a dials

    missed that you where heading down this week would have had you look at next lot for me LOL.
  11. O

    Just picked up a 802a and need parts...

    Congrats on new tool or toy.
  12. O

    802'a from the March 3rd Sale

    had a family issue at 1500 hours. Kids car broke down and had to give up my biding LOL. look at it that she saved me some cash. LOL. looking like some good prices. was some more on line for sale next week but they have been removed from the sight. Next time
  13. O

    Here's My MEP-002A/3A Set-Up

    Nice set up. I have just got my MEP 803A 10KW TQG set up and test run. Now looking to get a MEP 802A 5 KW TQG. Then build a shed and run some wire. Will be looking back at your set up when I do mine.
  14. O

    803a Problem

    did you try gas on a rag by air intake? this changes the flash point of the diesel fuel. also sounded like a knock when engine was tuning over not sure. :( have you pulled out an injector to see if fuel is coming out. if it is getting fuel and will not start again check for fresh fuel or...
  15. O

    803a Problem

    How many hours of the generator? put some gas on a rag place rag in the area of air in take see if it will start. if no gas you can use white gas from camping stove. this is better then starting fluid!!! this will work for most diesel engines. Yes I have used this many times in real world when I...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks