Recent content by Polaris bryan

Pics

I've been going through the tm's have DL many but still unsuccessful at finding a resolution to my issue. I have a m936 wrecker and the other day I started as usual no issues , was sitting warming up as I always do. It was idling for about 15 min and the truck shut itself off. Weird I...

As stated in original post 1969 m35a2 white multifuel , 11.00 Michelin x singles on all factory wheels. Universal joints seem good no Play that I can find just greased them today. I have a few pry bars will try that route see what moves around.

Diddnt just "dump" the clutch , I'm pretty careful to not shock load the drive line after having to replace the torque rods out back (dogbones) but let out rather quickly.

Air shift

I have crawled under and looked for anything loose or broken don't see anything. The other day I was in low range as usual (just creeping around the woods on ranch) anyway I went to back up and let out on clutch a bit quick , and heard a thump on floor board area like you whacked it with a large...

Ok so been a while , update on the rig. I have swapped out tanks from a 5 ton crane truck. Plumbed it all in using a external pump with 5 to 7 psi. Got all primed new filters new lines and a spin on style fuel filter seperator type. Fresh batteries all new cables and ends. Been bust lol...

That was one thing I've been trying to figure out was the psi rating , I don't want to cause any over pressure issues...

Where did you get the inline pump?

Would you mind directing me twords those retailers? Or at least a direction on where to look.

Trying to find a suitable fuel pump for this truck. The tanks are shot after I got them cleaned they both look worse than Swiss cheese lol.... That being said I do have a old partially stripped down 5 ton crane truck (I bought for the crane) it has both tanks that are good , however the 5 ton...

Trying to find a suitable fuel pump for this truck. The tanks are shot after I got them cleaned they both look worse than Swiss cheese lol.... That being said I do have a old partially stripped down 5 ton crane truck (I bought for the crane) it has both tanks that are good , however the 5...

Would the m61 be a good start for a working rig? Going to mainly live its life off road and probably in low range, hauling trailers and equipment sometimes , well drilling equipment etc. Don't plan on having it on a road just yet. Not familiar with these series trucks is why I'm asking...

Well heck..... damn if I could see that lol. I scoured them tags over and over heck even had a buddy looking them over with me. I do thank you for your better vision lol

Am I that blind in my days I can't see where it says m61a2 lol