-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Ray70's latest activity
-
RRay70 reacted to FarmingSmallKubota's post in the thread MEP-802A issues. No voltage on L1 with
Like.
Have you selected single or three phase on the AC selector? -
RRay70 replied to the thread Generator Libby MEP-003A.If you are needing to update filters, I would strongly suggest swapping out the stock canisters and going with @Ray70's fuel upgrades...
-
RRay70 replied to the thread Generator Libby MEP-003A.If you can get a video together that would be great. Thinking more about your problem, I'm wondering if you have an issue with your...
-
RIf you are needing to update filters, I would strongly suggest swapping out the stock canisters and going with @Ray70's fuel upgrades...
-
RRay70 replied to the thread MEP-802A Water pump/fan retainer nut?.When you get to tightening your fan nut, make sure its facing the right way. It should be flat on 1 side ( outside ) and have a round...
-
RRay70 replied to the thread Generator Libby MEP-003A.slowly beginning to mis and then slowly die after a few minutes sounds like a fuel supply problem. Do as the others have suggested by...
-
RSlow down here. Leave the three cables off. Take the three off on the other side, and tape them REAL GOOD up. Then start the set, and...
-
RRay70 replied to the thread MEP-802A questions.Not to split hairs, but I would not go with 1/2" bolts. You are better off with 5/8" or 3/4" Mainly because these machines use a couple...
-
RRay70 replied to the thread New to Mep-803A ownership general questions.It won't be a failure... EVERYTHING can be repaired, it's just a matter of working your way through the gremlins. If you got the set...
-
RRay70 replied to the thread MEP-802A questions.I usually just go on the internet and find 10-32 ( 5/8" or 3/4" long ) flange bolts and serrated flange nuts ( for places where you...
-
RRay70 replied to the thread MEP-802A questions.Either one is better than pump diesel! Essentially the same product but without the added road taxes. Not sure on the price, but many...
-
RRay70 replied to the thread MEP-802A questions.Home heating oil goes in everything diesel that I own. ( none of which are for road use ) Treated with Opti Lube XPD.
-
RRay70 replied to the thread MEP-802A Water pump/fan retainer nut?.Yes, left hand thread, fine thread as well, but I don't recall what size off hand.
-
RRay70 replied to the thread MEP-802A questions.Yup, the good old Suzuki Samauri overflow bottle! AND, if any of you 802/803 guys out there need a cap for an OEM overflow bottle ...