Recent content by reamos

Thanks for the replies I will check those sites out

Does anyone have are where to find a reduction unit gasket set for a xm211? I think the part # is 7411649. I just checked with Memphis Equip. and they no longer carry them. Chet.

I have the problem in my XM211 that runs fine in low but nothing in the high range. It was working until we changed the transmission oil then the high range would not work at all F1, F2 are reverse. Now the question, being new to the 211 you said to check the wavey release spring well I can't...

Transmission Breakdown Does anyone have a breakdown of the XM211 transmission?

XM211 Transmission problems I got my 211 running and drove it around the parking lot several times. Not having any brakes yet I got to keep it off the road unit I do a brake job on it. I drained the transmission oil and replaced it with NAPA ND 30. I did find a lot of water in the transmission...

(Distributor Problems) After doing all the voltage checks coming into the distributor and going out to the points this is what I have. I have 25 volts all the way to the points, but breaking the points with power on I have a good spark sometime and other times a weak spark. Nothing through the...

We have 24 volts through out the system but no spark at the spark plug. What I was talking about is the rotor itself. the contact at the center of the rotor to the end contact is open. I think it's the black section between the two. You wouldn't think that would open up. Will be ordering a new...

PLEASE HELP OK guys this is where I stand on my 52 XM211. All the spark plug wire ceramic was cracked so I replace them with a new set from Memphis Equiment and finely got it to turn over. After checking for fire out of the spark plug and not finding any I went into the distributor and after...

I purchase a set from memphisequipment.com for $280.00 but thanks for the feedback I will save the website for further use.

I'm in need of the dash to distributor wire harness. Really most of the wires in the engine well are in bad shape and could all be changed out. I have a brand new Carter pusher pump in the box that I might be willing on swapping for the right wire harnesses.

Does anyone have spark plug cables for a XM211. All mine have broken ceramic inserts and the rubber covering is all cracked.

Does anyone know what size socket are tool used to remove the spark plugs on a XM211?

More pictures.

Does anyone know the best type of battiers to use in th XM211?