• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

rickf's latest activity

  • rickf
    I just picked up a 003 with 8 hours on the clock. This thing appears to have been mothballed after testing since the convenience outlets...
  • rickf
    rickf replied to the thread MEP-802A questions.
    If you go to the top of the generator forum , on the right top you will see a button that says "post thread". This is where you start a...
  • rickf
    rickf replied to the thread MEP-802A questions.
    That was a subtle hint from Guyfang about starting a new thread for this so I will wait for that thread to say anymore.
  • rickf
    rickf reacted to Guyfang's post in the thread MEP-802A questions with Like Like.
    Dont forget, M116A3. The A3 is important. And when you start your own thread, we can give you lots more assistance.
  • rickf
    rickf replied to the thread MEP-802A questions.
    The trailer nomenclature will be on the tag on the trailer tongue. It would be a 116, 105 or 101 most likely and I believe the only one...
  • rickf
    rickf replied to the thread MEP-802A questions.
    You really should start a new thread. But a single 802 would have come on a 416 trailer would it not? They did not have a jack leg, just...
  • rickf
    rickf reacted to Scoobyshep's post in the thread Mep-003 donor engine with Like Like.
    Well the day has come, The new button was installed. I redid the flow test and #16 button was right on the mark. after putting...
  • rickf
    rickf reacted to Ray70's post in the thread Mep-003 donor engine with Like Like.
    Good work getting it going again! In the video I could briefly see the volt gage, which looked to be way above 240V ( assuming you have...
  • rickf
    rickf reacted to FarmingSmallKubota's post in the thread MEP-802A questions with Like Like.
    As Guyfang has told many folks and with lots of direction on this site. The TM's are your friend. Parts manuals and instructions make...
  • rickf
    rickf replied to the thread Need a top bow for a M116A2.
    Thanks for the heads up, I get a message there that I do not have sufficient privileges' to reply. "You have insufficient privileges...
  • rickf
    rickf replied to the thread MEP-802A questions.
    And as far as asking more questions, as long as they are all related to the original post then just go to the bottom of thread under the...
  • rickf
    rickf replied to the thread MEP-802A questions.
    The pumps will not stop because the IP is bypassing some fuel back to the tank. So it never builds up enough pressure to stop. If it...
  • rickf
    rickf replied to the thread Mep-003 donor engine.
    Sounds like someone was already working on it and gave up. I plan to eliminate all of those military filters and put a more modern...
  • rickf
    rickf replied to the thread Mep-003 donor engine.
    If the filters were that bad you should disassemble the fuel pumps and clean the filters in them, they are probably just as bad.
  • rickf
    rickf replied to the thread DC Breaker Tripping MEP 002A.
    The capacitor is only there for radio noise suppression. The military grounded and suppressed everything, I mean EVERY THING.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks