• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

robert248's latest activity

  • R
    robert248 replied to the thread MEP-802A questions.
    Thanks I'm going to power down and read!
  • R
    robert248 reacted to CallMeColt's post in the thread MEP-802A questions with Like Like.
    This thread troubleshoots the half reading issue; https://www.steelsoldiers.com/threads/mep-802a-m8-percent-load-gauge-issue.212356/
  • R
    robert248 replied to the thread MEP-802A questions.
    Started the test today at 1:30pm. Been running for just under 30 minutes. So far so good. Question: any reason the temperature gauge is...
    • 17503557256718689449228180880355.jpg
    • 17503557570128247372824534957277.jpg
    • 1750355775103515688396727105968.jpg
    • 17503557907206962828834917690168.jpg
    • 17503558150293317296902122405418.jpg
    • 17503558344271492100293251858348.jpg
    • 1750355856433462742562726746364.jpg
  • R
    robert248 reacted to LuckeyD's post in the thread MEP-802A questions with Like Like.
    Codes are from the unit level maintenance computer and mean how fast they are supposed to be addressed. NCOMP is a program where a...
  • R
    robert248 reacted to vrzff's post in the thread MEP-802A questions with Like Like.
    While it's running, stick a manometer into the oil dipstick. You should be running with at least 1" WC of vacuum. This will tell you...
  • R
    robert248 reacted to CallMeColt's post in the thread MEP-802A questions with Like Like.
    Here's what you should do to test your generator.
  • R
    robert248 replied to the thread MEP-802A questions.
    Here is a short clip of it running. Had to zip the file in order to upload it.
  • R
    robert248 replied to the thread MEP-802A questions.
    Finally got it running today. This is a snapshot of when it was running. Only ran it for less than 3 minutes. All of the gauges seemed...
    • generator running.png
  • R
    robert248 replied to the thread MEP-802A questions.
    Thanks! That's what I thought but just wanted to get confirmation. Yes, the hose is connected as you describe. Letting the blue gasket...
  • R
    robert248 reacted to Light in the Dark's post in the thread MEP-802A questions with Like Like.
    That is the block coolant drain. If you leave it open all the coolant will drain out of the block and the radiator to that static level...
  • R
    robert248 replied to the thread MEP-802A questions.
    When putting it back together does this need to stay open or closed?
    • leave_open_or_closed.png
  • R
    robert248 reacted to Ray70's post in the thread MEP-802A questions with Like Like.
    You can use any kind of thread sealer. I tend to use Permatex #2 non-hardening. But anything will do, even the blue gasket maker you...
  • R
    robert248 replied to the thread MEP-802A questions.
    What does this need in terms of lubricant if any?
    • 17468020324218265569978912270049.jpg
    • 17468021372706430295215256035232.jpg
  • R
    robert248 reacted to Ray70's post in the thread MEP-802A questions with Like Like.
    On the o-ring gasket, there are 2 of them, however in your picture the 2nd one is still inside the block. That tube is a short stub with...
  • R
    robert248 replied to the thread MEP-802A questions.
    These wires came off and I don't remember which went where. Does it matter when I go to reconnect them? Also on the gasket there should...
    • 17462268722771849741721148775752.jpg
    • 17462269508716804146324809178908.jpg
Show older items
113,434members
166,700threads
2,347,226posts
2,397online users
Top