• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Ronmar's latest activity

  • R
    Ronmar reacted to GeneralDisorder's post in the thread No 12v Power at PDP with Like Like.
    Connections. Batteries and PPD and the connections and grounds for the cab.
  • R
    Ronmar replied to the thread No 12v Power at PDP.
    12 and 24V run from batteries to the Polarity Protection Device 12 and 24v batt terminals between spare and air filter. The alternator...
  • R
    Ronmar replied to the thread M1078A1 ABS Light on.
    Exactly! The max cab load is probably under 25A for 14/28 combined, and the cables they used up to the power panel are probably good...
  • R
    Ronmar reacted to GeneralDisorder's post in the thread M1078A1 ABS Light on with Like Like.
    Which they realistically never do (carry full load). I'm going on a cleaning expedition if I see more than 1/4 volt.
  • R
    Ronmar replied to the thread M1078A1 ABS Light on.
    yep, developed voltage between the different ground points = resistance, probably in the connection points. All wires have resistance...
  • R
    Ronmar reacted to GeneralDisorder's post in the thread M1078A1 ABS Light on with Like Like.
    The one behind the grill is the most important for the gauges and computers in the cab and powered by the cab ignition relays to not...
  • R
    Ronmar replied to the thread M1078A1 ABS Light on.
    What year is this truck? The MMDC is the digital controller that drives the bussed/digital/electronic gauges. located under the...
  • R
    Ronmar reacted to GeneralDisorder's post in the thread M1078A1 ABS Light on with Like Like.
    Cab grounds......
  • R
    Ronmar replied to the thread M1078A1 ABS Light on.
    Charge voltage dropping is a weird symptom, unless it is confusing the crap out of the MMDC... With 5 solids it is probably the CTIS...
  • R
    Ronmar replied to the thread New LMTV Owner.
    "uh-uh... I know what you are thinking, did he fire 6 shots or only 5"... So, You feelin lucky?
  • R
    Ronmar reacted to AKPacker's post in the thread New LMTV Owner with Like Like.
    Agree with the others above, I would not plan on driving any significant distance unless you have the tools and time to thoroughly go...
  • R
    Ronmar replied to the thread M1078A1 ABS Light on.
    did the reader function OK with CTIS connected? one potential issue we have seen here is the bad module pulls down/corrupts the data...
  • R
    Ronmar reacted to GeneralDisorder's post in the thread LMTV FMTV Exhaust Brake Questions? with Like Like.
    Wait till you have more weight. That will likely make it less harsh. I don't notice anything untoward with the downshifting down grades...
  • R
    Ronmar reacted to GeneralDisorder's post in the thread New LMTV Owner with Like Like.
    That truck is nearly 30 years old. I barely made it home in my 2008 back in 2021 when it was *only* 17 years old. How knowledgeable...
  • R
    Ronmar reacted to NDT's post in the thread New LMTV Owner with Like Like.
    How cool is that! Sounds like an adventure. Carefully review the Matson rules, I think no dripping leaks and no mud. Remember most of...
Show older items
113,570members
166,790threads
2,348,313posts
1,860online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks