• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Scoobyshep's latest activity

  • Scoobyshep
    Scoobyshep replied to the thread And then there were 2....
    I bought 1 generator back in 2018. Which prompted me to buy one on behalf of a friend. Needless to say I have in my possession more than...
  • Scoobyshep
    Scoobyshep replied to the thread MEP-114A GPU.
    Yes. Do not plug anything in with a motor (unless you really don't like the item you're plugging in) Sent from my SM-S908U using Tapatalk
  • Scoobyshep
    Scoobyshep replied to the thread Mep 806b fuel sender issues.
    I would find where that circuit lands to whatever is monitoring and you can use a resistor or potentiometer to simulate the fuel sender...
  • Scoobyshep
    Scoobyshep replied to the thread Mep 806b fuel sender issues.
    Could be a bad ground Sent from my SM-S908U using Tapatalk
  • Scoobyshep
    Scoobyshep replied to the thread MEP-114A GPU.
    Even diesel today is less slick as diesel of 1970. I always add a lubricant additive to my sets. Sent from my SM-S908U using Tapatalk
  • Scoobyshep
    The disadvantage to charging 2 12v batteries in series is 1 will take more of a charge than the other. As they age and the sulfides...
  • Scoobyshep
    Relays go bad, that's why they are in sockets. Sent from my SM-S908U using Tapatalk
  • Scoobyshep
    Scoobyshep replied to the thread MEP-114A GPU.
    Unless you get a 2nd one and plan on paralleling them you can just ignore those sync lights Sent from my SM-S908U using Tapatalk
  • Scoobyshep
    If it's just not getting past the contactor the good news is it's a fairly simple control circuit just have to figure out what is not...
  • Scoobyshep
    Scoobyshep replied to the thread MEP-114A GPU.
    That would most certainly do it Sent from my SM-S908U using Tapatalk
  • Scoobyshep
    Scoobyshep replied to the thread MEP-114A GPU.
    I built a heater for my 004 which consists of three water heater elements that I just submerge in a tank of water. Without factoring in...
  • Scoobyshep
    Scoobyshep replied to the thread MEP-114A GPU.
    Pretty much anything without a motor would be the general blanket statement. Heaters and incandescent light bulbs really don't care...
  • Scoobyshep
    Scoobyshep replied to the thread MEP-114A GPU.
    The frequency gauge should be before the output contactor so it should indicator frequency even if the main contactor is off. I would...
  • Scoobyshep
    Scoobyshep replied to the thread MEP-114A GPU.
    Of all the sets I've worked on that had that model of fuel pump I think I've only had one that was not salvageable. I recently cleaned...
  • Scoobyshep
    Scoobyshep replied to the thread MEP-114A GPU.
    There are off the shelf options available that will function however tearing the existing pumps apart and cleaning them cost you maybe a...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks