Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Just a little advise. I'm going to open up the differentials and do a fluid change this weekend. Called around and priced some oil and wonder if anyone has any experience with the Masterpro which I guess is the O'reillys brand. I'm asking because I can get 5 Gallon buckets for $129.00 and the...
The windows work great. however, I used some silicone spray about 2 weeks ago and for some reason the Driver side is beginning to stick. The passenger side is smooth as can be. If anyone has any suggestions on a different way to lubricate the windows, then please by all means, let me know...
Has anyone had to source these? 3/4” MIP x 3/8” FIP hex bushing? Everyone of these I have found are not long enough to fit through the rear bumper on my M1088? Any help finding two of them would be appreciated. Thanks
Sorry bud. 1 more question. Do I keep the wire on the back terminal connected, or do i just replace the front wire and disconnect the wire on the back terminal?
Here is one I found that mentions the fix. Post 5- 7 or 8 is a good start. https://www.steelsoldiers.com/showthread.php?170432-Just-bought-a-1998-lmtv&p=2042016&highlight=excit+wire+solenoid#post2042016
Are the fuseable Links the thick colored yellow and red washers on the ALT Terminals?
Ok guys. The reserve Mechanic couldn’t come this weekend and i have a couple hours to throw at my problem.
I have 14.1 on the yellow Alt terminal
I have 28.4 on the red Alt terminal
my regulator does not have LED lights but the forward terminal has 2.4 volts? The back terminal has 22.3v...
I have tried and tried to become more mechanically inclined, but to no avail. I develop buildings for a living and can build anything with an address.
I stopped my the reserve center which is next door to the National Guard Depot and they have full time Mechanics who do not mind working for...
Gentlemen. Once again thank you for the suggestions. I’ll run though all of that one by one this week and let you know. I also have one of the reserve center mechanics coming by this week to help with it.
Hey guys. Before I ask, i'll let you know that I have read through the threads and have followed as many directions as possible. As of last week I have been experiencing some voltage irregularities in my M1088. I have 14 and 28 volts at the alternator, I have 13 and 27 at the lugs on the...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!